GOST 14953-1980 PDF

Scope: This standard applies to conical countersinks for processing center holes in accordance with GOST 14034-74 and conical countersinks with an angle

GOST 14953-1980 Referenced Document

GOST 12876-1967 Bearing surface under fasteners. Dimensions
GOST 14034-1974 Centre holes. Dimensions
GOST 15527-1970 Copper zinc pressure treated alloys (brasses). Types
GOST 18088-1983 Metall-cutting, diamond, wood-cutting and fitter's tools. Packing, marking, transportation fitter and auxliary*， 1983-04-19 Update
GOST 19265-1973 Bars and strips out of high-speed steel. Specifications
GOST 2 Ammonium nitrate. Specifications*， 2024-04-19 Update
GOST 23726-1979 Metalcutting and woodcutting. Acceptance
GOST 25557-1982 Machine tool tapers. Basic dimensions*， 1982-04-19 Update
GOST 2789-1973 Surface roughness. Parameters and characteristics
GOST 2848-1975 Tapers of tools. Tolerances. Methods and means of control
GOST 4543-1971 Structural alloy steel bars. Specifications
GOST 5950-1973 Bars and strips of tool alloyed steel. Specifications
GOST 8.051-1981 State system for ensuring the uniformity measurements. Permissible errors of measurement of linear dimensions to 500 mm*， 1981-04-19 Update
GOST 9.014-1978 Unified system of corrosion and ageing protection. Temporary corrosion protection of products. General requirements
GOST 9013-1959 Metals. Method of measuring Rockwell hardness*， 2024-04-19 Update
GOST 9378-1975 Surface roughness comparison specimens. Technical requirements