GOST 5808-1977
Half-side and side-and-face milling cutters with inserted carbide blades. Techical specifications

Standard No.

GOST 5808-1977

Release Date

1977

Published By

RU-GOST R

Latest

GOST 5808-1977

Replace

GOST 5808-1967

Scope

This standard applies to double-sided and three-sided disk cutters with insert knives equipped with carbide, etc.

GOST 5808-1977 Referenced Document

• GOST 1050-1988 Carbon structural quality steel gauged bars with special surface finish. General specifications*， 1988-04-19 Update
• GOST 1412-1985 Flake graphite iron for casting. Grades*， 1985-04-19 Update
• GOST 1435-1999 Bars, strips and reels of tool unalloyed steel. General specifications*， 1999-04-19 Update
• GOST 15527-2004 Pressure treated copper zinc alloys (brasses). Grades*， 2024-04-19 Update
• GOST 18088-1983 Metall-cutting, diamond, wood-cutting and fitter's tools. Packing, marking, transportation fitter and auxliary*， 1983-04-19 Update
• GOST 23726-1979 Metalcutting and woodcutting. Acceptance*， 1979-04-19 Update
• GOST 2568-1971 Currugat and inclination angles of blades and slots of cutting tools. Sizes
• GOST 25706-1983 Magnifiers. Types, basic parameters. General technical requirements*， 1983-04-19 Update
• GOST 2789-1973 Surface roughness. Parameters and characteristics
• GOST 3882-1974 Sintered hard alloys. Types
• GOST 4543-1971 Structural alloy steel bars. Specifications
• GOST 4872-1975 Sintered hard alloys products for cutting tool. Specifications
• GOST 8.051-1981 State system for ensuring the uniformity measurements. Permissible errors of measurement of linear dimensions to 500 mm*， 1981-04-19 Update
• GOST 9.014-1978 Unified system of corrosion and ageing protection. Temporary corrosion protection of products. General requirements*， 1978-04-19 Update
• GOST 9.306-1985 Unified system of corrosion and ageing protection. Metallic and non-metallic inorganic coatings. Symbols*， 1985-04-19 Update
• GOST 9013-1959 Metals. Method of measuring Rockwell hardness*， 2024-04-19 Update
• GOST 9378-1993 Roughness comparison specimens. General specifications*， 1993-04-19 Update
• GOST 9472-1990 Tool holding on arbors. Types and dimensions*， 1990-04-19 Update

GOST 5808-1977 history

• 1977 GOST 5808-1977 Half-side and side-and-face milling cutters with inserted carbide blades. Techical specifications
• 0000 GOST 5808-1967