EN ISO 11363-1:2010
Gas cylinders - 17E and 25E taper threads for connection of valves to gas cylinders - Part 1: Specifications (Incorporating corrigenda April 2011 and January 2012)

Standard No.

EN ISO 11363-1:2010

Release Date

2010

Published By

European Committee for Standardization (CEN)

Status

Be replaced 2018-05

Replace By

EN ISO 11363-1:2018

Latest

EN ISO 11363-1:2018/A1:2023

Replace

DIN EN 629-1:1996 DIN EN ISO 11116-1:2000 DIN EN ISO 11363-1:2008

Scope

This part of ISO 11363 specifies dimensions and tolerances for taper screw threads of nominal diameter 17,4 mm (designated 17E) and 25,8 mm (designated 25E) used for the connection of valves to gas cylinders

EN ISO 11363-1:2010 Referenced Document

• ISO 11363-1:2010 Gas cylinders - 17E and 25E taper threads for connection of valves to gas cylinders - Part 1: Specifications

EN ISO 11363-1:2010 history

• 2023 EN ISO 11363-1:2018/A1:2023 Gas cylinders - 17E and 25E taper threads for connection of valves to gas cylinders - Part 1: Specifications - Amendment 1 (ISO 11363-1:2018/Amd 1:2023)
• 2018 EN ISO 11363-1:2018 Gas cylinders - 17E and 25E taper threads for connection of valves to gas cylinders - Part 1: Specifications (ISO 11363-1:2018)
• 2010 EN ISO 11363-1:2010 Gas cylinders - 17E and 25E taper threads for connection of valves to gas cylinders - Part 1: Specifications (Incorporating corrigenda April 2011 and January 2012)

EN ISO 11363-1:2010 Gas cylinders - 17E and 25E taper threads for connection of valves to gas cylinders - Part 1: Specifications (Incorporating corrigenda April 2011 and January 2012) has been changed from DIN EN 629-1:1996 .