ISO 9562:2004 PDF

Scope: This International Standard specifies a method for the direct determination of an amount of usually 10 μg/l in water of organically bound chlorine, bromine and iodine (expressed as chloride) adsorbable on activated carbon. This method is applicable to test samples (see 9.2) with concentrations of inorganic chloride ions of less than 1 g/l. Samples with higher concentrations are diluted prior to analysis. This method is also applicable to samples containing suspended solids where halogens are adsorbed onto the solid matter (e.g. insoluble halides). Filtration of the sample before analysis allows the separate determination of dissolved and particulate adsorbable organically bound halogens (AOX). Filtered samples with high inorganic chloride content can be analysed by a modified method [dissolved adsorbable organically bound halogens after solid phase extraction in waters with high salt content (SPE-AOX)] (see Annex A). However, results obtained by this modified method can differ significantly from those of the required method.

ISO 9562:2004 Referenced Document

ISO 1773:1997 Laboratory glassware - Narrow-necked boiling flasks
ISO 3696:1987 Water for analytical laboratory use; Specification and test methods

2004 ISO 9562:2004 Water quality - Determination of adsorbable organically bound halogens (AOX)
1998 ISO 9562:1998 Water quality - Determination of adsorbable organically bound halogens (AOX)
1989 ISO 9562:1989 Water quality; determination of adsorbable organic halogens (AOX)