DIN ISO 702-3:2010
Machine tools - Connecting dimensions of spindle noses and work holding chucks - Part 3: Bayonet type (ISO 702-3:2007)

Standard No.

DIN ISO 702-3:2010

Release Date

2010

Published By

German Institute for Standardization

Status

Be replaced

Replace By

DIN ISO 702-3:2010-04

Latest

DIN ISO 702-3:2010-04

Replace

DIN 55027:1980 DIN 55028:1980 DIN ISO 702-3:2006

Scope

This standard specifies the sizes for interchangeability of bayonet-type lathe spindle noses and corresponding face plates. The types "A" conical and "Camlock" are dealt with in DIN ISO 702-1 and DIN ISO 702-2, respectively.

DIN ISO 702-3:2010 history

• 2010 DIN ISO 702-3:2010-04 Machine tools - Connecting dimensions of spindle noses and work holding chucks - Part 3: Bayonet type (ISO 702-3:2007)
• 2010 DIN ISO 702-3:2010 Machine tools - Connecting dimensions of spindle noses and work holding chucks - Part 3: Bayonet type (ISO 702-3:2007)
• 0000 DIN ISO 702-3:2006
• 1980 DIN 55028:1980 Machine Tools; Mountings for Clamping Devices; Connecting Dimensions for Spindle Noses according to DIN 55026 and DIN 55027

DIN ISO 702-3:2010 Machine tools - Connecting dimensions of spindle noses and work holding chucks - Part 3: Bayonet type (ISO 702-3:2007) has been changed from DIN 55027:1980 Machine Tools; Spindle Noses with Centering Taper, Face Plate and Bayonet Type Fastening, Accessories; Dimensions.

DIN ISO 702-3:2010 Machine tools - Connecting dimensions of spindle noses and work holding chucks - Part 3: Bayonet type (ISO 702-3:2007) has been changed from DIN 55028:1980 Machine Tools; Mountings for Clamping Devices; Connecting Dimensions for Spindle Noses according to DIN 55026 and DIN 55027.