ASTM B165-05(2009)
Standard Specification for Nickel-Copper Alloy (UNS N04400)* Seamless Pipe and Tube

Standard No.

ASTM B165-05(2009)

Release Date

2005

Published By

American Society for Testing and Materials (ASTM)

Status

Be replaced

Replace By

ASTM B165-05(2014)

Latest

ASTM B165-19

Scope

1.1 This specification covers nickel-copper alloy UNS N04400* in the form of cold-worked seamless pipe and tube in the conditions shown in Table 1 and Table X1.1.

1.1.1 Hot worked material is available. Properties and permissible tolerances are to be agreed upon between the manufacturer and purchaser.

1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.

1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to become familiar with all hazards including those identified in the appropriate Material Safety Data Sheet (MSDS) for this product/material as provided by the manufacturer, to establish appropriate safety and health practices, and determine the applicability of regulatory limitations prior to use.

TABLE 1 Mechanical Properties of Pipe and Tube

Condition and Size	Tensile Strength, min, psi (MPa)	Yield Strength, min. (0.2% offset), min, psi (MPa)	Elongation in 2 in. or 50 mm (or 4 D), min, %
Annealed:
5 in. (127 mm) outside diameter and under	70 000 (480)	28 000 (195)	35
Over 5 in. (127 mm) outside diameter	70 000 (480)	25 000 (170)	35
Stress-Relieved:
All sizes	85 000 (585)	55 000 (380)	15

ASTM B165-05(2009) Referenced Document

• ASTM B829 Standard Specification for General Requirements for Nickel and Nickel Alloys Seamless Pipe and Tube
• ASTM E29 Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications
• ASTM E76 Standard Test Methods for Chemical Analysis of Nickel-Copper Alloys (Withdrawn 2003)
• ASTM E8 Standard Test Methods for Tension Testing of Metallic Materials

ASTM B165-05(2009) history

• 2019 ASTM B165-19 Standard Specification for Nickel-Copper Alloy Seamless Pipe and Tube
• 2005 ASTM B165-05(2014) Standard Specification for Nickel-Copper Alloy &40;UNS N04400&41; Seamless Pipe and Tube
• 2005 ASTM B165-05(2009) Standard Specification for Nickel-Copper Alloy (UNS N04400)* Seamless Pipe and Tube
• 2005 ASTM B165-05 Standard Specification for Nickel-Copper Alloy (UNS N04400)* Seamless Pipe and Tube
• 2003 ASTM B165-93(2003)e1 Standard Specification for Nickel-Copper Alloy (UNS N04400)* Seamless Pipe and Tube
• 1993 ASTM B165-93 Standard Specification for Nickel-Copper Alloy (UNS N04400)* Seamless Pipe and Tube