ASTM D1997-91(2008)e1
Standard Test Method for Laboratory Determination of the Fiber Content of Peat Samples by Dry Mass

Standard No.

ASTM D1997-91(2008)e1

Release Date

1991

Published By

American Society for Testing and Materials (ASTM)

Status

Be replaced

Replace By

ASTM D1997-13

Latest

ASTM D1997-20

Scope

The purpose of this test method is to standardize the procedure for determining fiber content of peat samples by dry mass.

A standard test method for determining the quantity of fibers in a peat sample is necessary not only for classifying samples (as in Classification D 4427), but is also a significant parameter in predicting or defining the many end uses of peat. In this regard, fiber content has been related to agricultural and horticultural end uses (such as mulching, soil enrichment, etc.), geotechnical measurements (such as strength, compressibility, permeability, etc.), industrial chemical uses (such as production of waxes, activated carbon, medicinals, etc.), and even energy uses (such as direct combustion, methanol production, gas yields, etc.).

1.1 This test method covers the laboratory determination of the fiber content of samples of peat (as defined in Classification D 4427) by dry mass. It also may be used for non-peat organic soil materials.

1.2 Because this test method is simple and requires no sophisticated equipment to perform, it is especially recommended for routine reconnaissance work, where large numbers of samples need to be tested and mineral contents are low.

1.3 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.

1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

ASTM D1997-91(2008)e1 history

• 2020 ASTM D1997-20 Standard Test Method for Laboratory Determination of the Fiber Content of Peat and Organic Soils by Dry Mass
• 2013 ASTM D1997-13 Standard Test Method for Laboratory Determination of the Fiber Content of Peat Samples by Dry Mass
• 1991 ASTM D1997-91(2008)e1 Standard Test Method for Laboratory Determination of the Fiber Content of Peat Samples by Dry Mass
• 1991 ASTM D1997-91(2008) Standard Test Method for Laboratory Determination of the Fiber Content of Peat Samples by Dry Mass
• 1991 ASTM D1997-91(2001) Standard Test Method for Laboratory Determination of the Fiber Content of Peat Samples by Dry Mass
• 1991 ASTM D1997-91(1996) Standard Test Method for Laboratory Determination of the Fiber Content of Peat Samples by Dry Mass