This Standard sets out performance and general requirements for insulator and conductor
fittings (other than helical fittings, OPGW and ADSS fittings, which are covered in
AS 1154.3) together with the critical dimensions for cast, forged or fabricated insulator
fittings for use on overhead electric power lines using insulators with minimum failing
loads of 70 kN, 120 kN and 160 kN.
Pulling eyes provided to assist installation and fittings for insulated service lines, aerial
bundled cables and high-voltage covered conductors are not covered by this Standard.
Fittings for high-temperature conductors are not covered by this Standard.
AS 1154.1:2009 Referenced Document
AS 1110.1 ISO metric hexagon bolts and screws — Product grades A and B, Part 1: Bolts*， 2015-08-26 Update
AS 1111.1 ISO metric hexagon bolts and screws — Product grade C, Part 1: Bolts*， 2015-08-26 Update
AS 1112.1 ISO metric hexagon nuts, Part 1: Style 1 — Product grades A and B*， 2015-11-09 Update
AS 1112.2 ISO metric hexagon nuts, Part 2: Style 2 — Product grades A and B*， 2015-11-09 Update
AS 1112.3 ISO metric hexagon nuts, Part 3: Product grade C*， 2015-11-09 Update
AS 1112.4 ISO metric hexagon nuts, Part 4: Chamfered thin nuts — Product grades A and B*， 2015-11-09 Update
AS 1214 Hot-dip galvanized coatings on threaded fasteners (ISO metric coarse thread series)
AS 1237.1 Plain washers for metric bolts, screws and nuts for general purposes - General plan
AS 1237.2 Tolerances for fasteners, Part 2: Washers for bolts, screws and nuts — Product grades A, C and F*， 2016-09-07 Update
AS 1442 Carbon steels and carbon-manganese steels - Hot-rolled bars and semifinished products
AS 1444 Malleable alloy steel standards, hardenability (H) series and mechanical properties specified for hardening and tempering
AS 1448 Carbon steel and carbon manganese steel forgings (maximum cross-section 300 mm)
AS 1544.2 Methods for impact tests on metals - Charpy V-notch*， 2024-04-19 Update
AS 1733 Methods for the determination of grain size in metals
AS 1816.1 Metallic materials - Brinell hardness test - Test method
AS 1816.2 Metallic materials - Brinell hardness test - Verification and calibration of testing machines
AS 1816.3 Metallic materials - Brinell hardness test - Calibration of reference blocks