DS/EN 28 847:1991
Small craft - Steering gear - Wire rope and pulley systems

Standard No.
DS/EN 28 847:1991
Release Date
1991
Published By
Danish Standards Foundation
Status
Replace By
DS/EN 28 860-1:1991
Latest
DS/EN 28 806-4:1994
Scope
This International Standard specifies the minimum level of re-quirements for construction, operation and installation of wire rope and pulley steering systems on sailing craft, with or without an auxiliary engine. This International Standard sets requirements for the design and construction of all components of a steering system from the wheel to, and including, the steering arm. It applies only to wire rope and pulley steering systems, whether for pedestal or bulkhead types. The design and specifications for the rudder shaft and rudder blade are within the province of the naval architect and are assumed to be appropriate to the size and speed of the boat.

DS/EN 28 847:1991 history

  • 1994 DS/EN 28 806-4:1994 Information technology - Computer graphics - Graphical Kernel System for Three Dimensions (GKS-3D) language bindings - Part 4: C
  • 1993 DS/EN 28 849:1993 Small craft - Electrically operated bilge-pumps
  • 1993 DS/EN 28 848:1993 Small craft - Remote steering systems
  • 1993 DS/EN 28 846:1993 Small craft - Electrical devices - Protection against ignition of surrounding flammable gases
  • 1993 DS/EN 28 805:1993 Information Processing Systems - Computer graphics - Graphical Kernel System for Three Dimensions (GKS-3D) functional description
  • 1993 DS/EN 28 798:1993 Acoustics - Reference levels for narrow-band masking noise
  • 1993 DS/EN 28 768:1993 Packaging - Complete filled transport packages - Toppling test
  • 1993 DS/EN 28 752:1993 Spring-type straight pins, slotted
  • 1993 DS/EN 28 662-1:1993 Hand-held portable power tools - Measurement of vibrations at the handle -Part 1: General
  • 1993 DS/EN 28 654:1993 Colours of gold alloys - Definition, range of colours and designation
  • 1993 DS/EN 28 653:1993 Jewellery - Ring-sizes - Definition, measurement and designation
  • 1993 DS/EN 28 630-3:1993 Information processing - Data interchange on 130 mm (5.25 in) flexible disk cartridges using modified frequency modulation recording at 13 262 ftprad, on 80 tracks on each side - Part 3: Track format B for 80 tracks
  • 1993 DS/EN 28 630-2:1993 Information processing - Data interchange on 130 mm (5.25 in) flexible disk cartridges using modified frequency modulation recording at 13 262 ftprad, on 80 tracks on each side - Part 2: Track format A for 77 tracks
  • 1993 DS/EN 28 630-1:1993 Information processing - Data interchange on 130 mm (5.25 in) flexible disk cartridges using modified frequency modulation recording at 13 262 ftprad, on 80 tracks on each side - Part 1: Dimensional, physical and magnetic characteristics
  • 1993 DS/EN 28 343:1993 Ferronickel - Determination of silicon content - Gravimetric method
  • 1993 DS/EN 28 318:1993 Packaging - Complete, filled transport packages - Vibration tests using a sinusoidal variable frequency
  • 1993 DS/EN 28 317:1993 Child-resistant packaging - Requirements and testing procedures for reclosable packages
  • 1993 DS/EN 28 028:1993 Rubber and/or plastics hose assemblies for airless paint spraying - Specification
  • 1992 DS/EN 28 891:1992 Dental casting alloys with noble metal content of 25% up to but not including 75%
  • 1992 DS/EN 28 879:1992 Information processing - Text and office systems - Standard Generalized Markup Language (SGML) and its Amendment 1:1988
  • 1992 DS/EN 28 839:1992 Mechanical properties of fasteners - Bolts, screws, studs and nuts made of non-ferrous metals
  • 1992 DS/EN 28 765:1992 Hexagon head bolts with metric fine pitch thread - Product grades A and B
  • 1992 DS/EN 28 751:1992 Spring-type straight pins - Coiled, light duty
  • 1992 DS/EN 28 750:1992 Spring-type straight pins - Coiled, standard duty
  • 1992 DS/EN 28 749:1992 Pins and grooved pins - Shear test
  • 1992 DS/EN 28 748:1992 Spring-type straight pins - Coiled, heavy duty
  • 1992 DS/EN 28 747:1992 Grooved pins with countersunk head
  • 1992 DS/EN 28 746:1992 Grooved pins with round head
  • 1992 DS/EN 28 745:1992 Grooved pins - Half-length taper grooved
  • 1992 DS/EN 28 744:1992 Grooved pins - Full-length taper grooved
  • 1992 DS/EN 28 743:1992 Grooved pins - Half-length centre grooved
  • 1992 DS/EN 28 742:1992 Grooved pins - Third-length centre grooved
  • 1992 DS/EN 28 741:1992 Grooved pins - Half-length reverse taper grooved
  • 1992 DS/EN 28 740:1992 Grooved pins - Full-length parallel grooved, with chamfer
  • 1992 DS/EN 28 739:1992 Grooved pins - Full-length parallel grooved, with pilot
  • 1992 DS/EN 28 738:1992 Plain washers for clevis pins - Product grade A
  • 1992 DS/EN 28 737:1992 Taper pins with external thread, unhardened
  • 1992 DS/EN 28 736:1992 Taper pins with internal thread, unhardened
  • 1992 DS/EN 28 735:1992 Parallel pins with internal thread, hardened
  • 1992 DS/EN 28 734:1992 Parallel pins, hardened (Dowel pins
  • 1992 DS/EN 28 733:1992 Parallel pins with internal thread, unhardened
  • 1992 DS/EN 28 676:1992 Hexagon head screws with metric fine pitch thread - Product grades A and B
  • 1992 DS/EN 28 675:1992 Hexagon thin nuts with metric fine pitch thread - Product grades A and B
  • 1992 DS/EN 28 674:1992 Hexagon nuts, style 2, with metric fine pitch thread - Product grades A and B
  • 1992 DS/EN 28 673:1992 General-purpose flat pallets for through transit of goods - Performance requirements
  • 1992 DS/EN 28 627/Ret.1:1992 Dentistry - Stiffness of the tufted area of tooth-brushes (Corrigendum)
  • 1992 DS/EN 28 430-3:1992 Resistance spot welding - Electrode holders - Part 3: Parallel shank fixing for end thrust
  • 1992 DS/EN 28 430-1:1992 Resistance spot welding - Electrode holders - Part 1: Taper fixing 1 : 10
  • 1992 DS/EN 28 325/Ret.1:1992 Dentistry - Dental rotary instruments - Test methods (Corrigendum)
  • 1992 DS/EN 28 206:1992 Acceptance tests for oxygen cutting machines - Reproducible accuracy - Operational characteristics
  • 1992 DS/EN 28 167:1992 Projections for resistance welding
  • 1992 DS/EN 28 092-2:1992 Road vehicles - Flat, quick-connect terminations - Part 2: Test and performance requirements for single pole connections
  • 1992 DS/EN 28 092-1:1992 Road vehicles - Flat, quick-connect terminations - Part 1: Tabs for single pole connections
  • 1992 DS/EN 28 050:1992 Ferronickel ingots or pieces - Sampling for analysis
  • 1992 DS/EN 28 049:1992 Ferronickel shot - Sampling for analysis
  • 1991 DS/EN 28 877:1991 Information processing systems - Interface connector and contact assignments for ISDN basic access interface located at reference points S and T
  • 1991 DS/EN 28 860-2:1991 Information processing - Data interchange on 90 mm (3.5 in) flexible disk cartridges using modified frequency modulation recording at 7 958 ftprad on 80 tracks on each side - Part 2: Track format
  • 1991 DS/EN 28 860-1:1991 Information processing - Data interchange on 90 mm (3.5 in) flexible disk cartridges using modified frequency modulation recording at 7 958 ftprad on 80 tracks on each side - Part 1: Dimensional, physical and magnetic characteristics
  • 1991 DS/EN 28 847:1991 Small craft - Steering gear - Wire rope and pulley systems
  • 1991 DS/EN 28 627:1991 Dentistry - Stiff ness of the tufted area of tooth-brushes
  • 1991 DS/EN 28 378-2:1991 Information processing - Data interchange on 130 mm (5.25 in) flexible disk cartridges using modified frequency modulation recording at 7 958 ftprad, 3,8 tpmm (96 tpi), on both sides - Part 2: Track format A
  • 1991 DS/EN 28 325:1991 Dental rotary instruments - Test methods


Copyright ©2024 All Rights Reserved