SAE AMS4118L-2009
Aluminum Alloy, Rolled or Cold Finished Bars, Rods, and Wire, 4.0Cu 0.70Mn 0.60Mg 0.50Si, Solution Heat Treated

Standard No.

SAE AMS4118L-2009

Release Date

2009

Published By

Society of Automotive Engineers (SAE)

Status

Be replaced

Replace By

SAE AMS4118L-2014

Latest

SAE AMS4118M-2022

Scope

This specification covers an aluminum alloy in the form of bars, rods, and wire. These products have been used typically for parts requiring good strength and whose fabrication does not involve welding, but usage is not limited to such applications. Certain design and processing procedures may cause these products to become susceptible to stress-corrosion cracking; ARP823 recommends practices to minimize such conditions.

SAE AMS4118L-2009 Referenced Document

• ASTM B660-08 Standard Practices for Packaging/Packing of Aluminum and Magnesium Products*， 2024-04-19 Update
• ASTM B666/B666M-08 Standard Practice for Identification Marking of Aluminum and Magnesium Products*， 2024-04-19 Update
• ASTM E29-08 Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications*， 2024-04-19 Update
• SAE AMS2201M-1994 TOLERANCES ALUMINUM AND ALUMINUM ALLOY BAR@ ROD@ WIRE@ AND FORGING STOCK ROLLED OR COLD-FINISHED
• SAE AMS2355H-2005 Quality Assurance Sampling and Testing of Aluminum Alloys and Magnesium Alloys, Wrought Products, Except Forging Stock, and Rolled, Forged, or Flash Welded Rings
• SAE AMS2772-1997 Heat Treatment of Aluminum Alloy Raw Materials (01 1997)
• SAE ARP823 MINIMIZING STRESS CORROSION IN WROUGHT HEAT TREATABLE ALUMINUM ALLOY PRODUCTS
• SAE ARP823E-2007 Minimizing Stress-Corrosion Cracking in Wrought Heat-Treatable Aluminum Alloy Products
• SAE AS1990-1990 Aluminum Alloy Tempers

SAE AMS4118L-2009 history

• 2022 SAE AMS4118M-2022 Aluminum Alloy, Rolled or Cold Finished Bars, Rods, and Wire 4.0Cu - 0.70Mn - 0.60Mg - 0.50Si (2017; -T4, -T451) Solution Heat Treated
• 2014 SAE AMS4118L-2014 Aluminum Alloy, Rolled or Cold Finished Bars, Rods, and Wire 4.0Cu - 0.70Mn - 0.60Mg - 0.50Si (2017; -T4, -T451) Solution Heat Treated
• 2009 SAE AMS4118L-2009 Aluminum Alloy, Rolled or Cold Finished Bars, Rods, and Wire, 4.0Cu 0.70Mn 0.60Mg 0.50Si, Solution Heat Treated
• 2006 SAE AMS4118K-2006 Aluminum Alloy, Rolled or Cold Finished Bars, Rods, and Wire 4.0Cu - 0.70Mn - 0.60Mg - 0.50Si (2017; -T4, -T451) Solution Heat Treated
• 2001 SAE AMS4118K-2001 Aluminum Alloy, Rolled or Cold Finished Bars, Rods, and Wire, 4.0Cu 0.70Mn 0.60Mg 0.50Si, Solution Heat Treated
• 1994 SAE AMS4118J-1994 Aluminum Alloy@ Rolled or Cold Finished Bars@ Rods@ and Wire 4.0Cu - 0.70Mn - 0.60Mg - 0.50Si (2017 (UNS A92017)
• 1990 SAE AMS4118H-1990 ALUMINUM ALLOY BARS@ RODS@ AND WIRE@ ROLLED OR COLD FINISHED 4.Cu - 0.70Mn - 0.60Mg - 0.50Si (2017; -T4@ -T451) Solution Heat Treated (UNS A92017)
• 1983 SAE AMS4118G-1983 ALUMINUM ALLOY BARS, ROLLED OR COLD FINISHED 4.0Cu - 0.70Mn - 0.60Mg - 0.50Si (2017; -T4, -T451) Solution Heat Treated
• 1979 SAE AMS4118F-1979 ALUMINUM ALLOY BARS, ROLLED, DRAWN, OR COLD FINISHED 4.0Cu - 0.70Mn - 0.60Mg - 0.50Si (2017-T4)
• 1968 SAE AMS4118E-1968 ALUMINUM ALLOY BARS, ROLLED, DRAWN, OR COLD FINISHED 4.0Cu - 0.70Mn - 0.50Mg (2017-T4)
• 1965 SAE AMS4118D-1965 ALUMINUM ALLOY BARS, ROLLED, DRAWN, OR COLD FINISHED 4.0Cu - 0.7Mn - 0.50Mg (2017-T4)
• 1957 SAE AMS4118C-1957 ALUMINUM ALLOY BARS 4Cu - 0.7Mn - 0.50Mg (2017-T4)
• 1943 SAE AMS4118B-1943 ALUMINUM ALLOY Copper Manganese Magnesium (17S-T) Rolled
• 1941 SAE AMS4118A-1941 ALUMINUM ALLOY Copper Manganese Magnesium (17S-T)
• 1939 SAE AMS4118-1939 ALUMINUM ALLOY BARS Copper Manganese Magnesium