DIN EN ISO 11612:2009
Protective clothing - Clothing to protect against heat and flame (ISO 11612:2008); English version of DIN EN ISO 11612:2009-05

Standard No.

DIN EN ISO 11612:2009

Release Date

2009

Published By

German Institute for Standardization

Status

Be replaced

Replace By

DIN EN ISO 11612:2015

DIN EN ISO 11612 E:2011-04

Latest

DIN EN ISO 11612:2023-09

Replace

DIN EN 531:1998 DIN EN ISO 11612:2007

Scope

This International Standard specifies performance requirements for garments made from flexible materials, which are designed to protect the wearer's body, except the hands, from heat and/or flame. For protection of the wearer's head and feet, the only items of protective clothing falling within the scope of this International Standard are gaiters, hoods and overboots. However, concerning hoods, requirements for visors and respiratory equipment are not given. The performance requirements set out in this International Standard are applicable to garments which could be worn for a wide range of end uses, where there is a need for clothing with limited flame spread properties and where the user can be exposed to radiant or convective or contact heat or to molten metal splashes. This International Standard is not applicable to protective clothing that is specified by other International Standards, such as for firefighting in structures and for use in welding and allied processes.

DIN EN ISO 11612:2009 Referenced Document

• EN 343:2003 Protective clothing - Protection against rain (Incorporates Amendment A1: 2007; Incorporating corrigendum November 2009)
• ISO 12127:1996 Clothing for protection against heat and flame - Determination of contact heat transmission through protective clothing or constituent materials
• ISO 13506 Protective clothing against heat and flame - Test method for complete garments - Prediction of burn injury using an instrumented manikin
• ISO 13688 Protective clothing — General requirements — Amendment 1*， 2021-02-25 Update
• ISO 13934-1 Textiles - Tensile properties of fabrics - Part 1: Determination of maximum force and elongation at maximum force using the strip method*， 2013-04-01 Update
• ISO 13935-2 Textiles - Seam tensile properties of fabrics and made-up textile articles - Part 2: Determination of maximum force to seam rupture using the grab method*， 2014-04-01 Update
• ISO 13937-2 Textiles - Tear properties of fabrics - Part 2: Determination of tear force of trouser-shaped test specimens (Single tear method)
• ISO 13938-1 Textiles — Bursting properties of fabrics — Part 1: Hydraulic method for determination of bursting strength and bursting distension*， 2019-11-22 Update
• ISO 15025 Protective clothing - Protection against flame - Method of test for limited flame spread*， 2016-12-01 Update
• ISO 17075 Leather — Chemical tests — Determination of chromium(VI) content
• ISO 17493 Clothing and equipment for protection against heat - Test method for convective heat resistance using a hot air circulating oven*， 2016-12-01 Update
• ISO 3071 Textiles — Determination of pH of aqueous extract*， 2020-01-27 Update
• ISO 3376:2002 Leather - Physical and mechanical tests - Determination of tensile strength and percentage extension
• ISO 3377-1 Leather — Physical and mechanical tests — Determination of tear load — Part 1: Single edge tear*， 2011-12-01 Update
• ISO 4045 Leather — Chemical tests — Determination of pH and difference figure*， 2018-05-01 Update
• ISO 4048 Leather — Chemical tests — Determination of matter soluble in dichloromethane and free fatty acid content*， 2018-06-01 Update
• ISO 5077 Textiles - Determination of dimensional change in washing and drying
• ISO 6942:2002 Protective clothing - Protection against heat and fire - Method of test: Evaluation of materials and material assemblies when exposed to a source of radiant heat
• ISO 7000 Graphical symbols for use on equipment — Index and synopsis*， 2019-07-12 Update
• ISO 9151 Protective clothing against heat and flame — Determination of heat transmission on exposure to flame*， 2017-03-01 Update
• ISO 9185 Protective clothing - Assessment of resistance of materials to molten metal splash
• ISO/TR 11610 Protective clothing - Vocabulary

DIN EN ISO 11612:2009 history

• 2023 DIN EN ISO 11612:2023-09 Protective clothing - Clothing to protect against heat and flame - Minimum performance requirements (ISO/DIS 11612:2023); German and English version prEN ISO 11612:2023 / Note: Date of issue 2023-08-11*Intended as replacement for DIN EN ISO 11612 (2015...
• 2023 DIN EN ISO 11612:2023 Protective clothing - Clothing to protect against heat and flame - Minimum performance requirements (ISO/DIS 11612:2023); German and English version prEN ISO 11612:2023
• 2015 DIN EN ISO 11612:2015-11 Protective clothing - Clothing to protect against heat and flame - Minimum performance requirements (ISO 11612:2015); German version EN ISO 11612:2015
• 2015 DIN EN ISO 11612:2015 Protective clothing - Clothing to protect against heat and flame - Minimum performance requirements (ISO 11612:2015); German version EN ISO 11612:2015
• 2009 DIN EN ISO 11612:2009 Protective clothing - Clothing to protect against heat and flame (ISO 11612:2008); English version of DIN EN ISO 11612:2009-05
• 0000 DIN EN ISO 11612:2007
• 1970 DIN EN 531:1998

DIN EN ISO 11612:2009 Protective clothing - Clothing to protect against heat and flame (ISO 11612:2008); English version of DIN EN ISO 11612:2009-05 has been changed from DIN EN 531:1998 .