International Organization for Standardization (ISO)
Latest
ISO 18073:2004
Scope
This International Standard specifies a method for the determination of tetra- to octa-chlorinated dibenzo-pdioxins
(PCDDs) and dibenzofurans (PCDFs) in waters and waste waters (containing less than 1 % by mass
solids) using high-resolution gas chromatography/high-resolution mass spectrometry (HRGC/HRMS).
This International Standard is applicable to the seventeen 2,3,7,8-substituted PCDDs/PCDFs specified in
Table 1.
The detection limits and quantitation levels in this method are usually dependent on the level of interferences
rather than instrumental limitations. The minimum levels (MLs) specified in Table 2 are the levels at which the
PCDDs/PCDFs can be determined with no interferences present. The method detection limit (MDL) for
2,3,7,8-TCDD has been determined as 4,4 pg/l based on this method using a sample volume of 1 l. Lower
detection limits may be achieved by using a larger sample volume.
This method is “performance based”. The analyst is permitted to modify the method to overcome interferences
or lower the cost of measurements, provided that all performance criteria in this International Standard are
met. The requirements for establishing method equivalency are given in 9.1.2.
ISO 18073:2004 Referenced Document
ISO 3696:1987 Water for analytical laboratory use; Specification and test methods
ISO 5667-1 Water quality — Sampling — Part 1: Guidance on the design of sampling programmes and sampling techniques*, 2023-03-14 Update
ISO 5667-2 Water quality; sampling; part 2: guidance on sampling techniques
ISO 6879:1995 Air quality - Performance characteristics and related concepts for air quality measuring methods
ISO 18073:2004 history
2004ISO 18073:2004 Water quality - Determination of tetra- to octa-chlorinated dioxins and furans - Method using isotope dilution HRGC/HRMS