DIN EN 13165:2009
Thermal insulation products for buildings - Factory made rigid polyurethane foam (PUR) products - Specification; English version of DIN EN 13165:2009-02

Standard No.

DIN EN 13165:2009

Release Date

2009

Published By

German Institute for Standardization

Status

Withdraw

Replace By

DIN EN 13165:2013

Latest

DIN EN 13165/A3:2018

Scope

This European Standard specifies the requirements for factory made rigid polyurethane foam (PUR) products, with or without rigid or flexible facings or coatings and with or without integral reinforcement, which are used for the thermal insulation of buildings. PUR also includes polyisocyanurate foam (PIR). The products are manufactured in the form of boards. This European Standard also covers the thermal performance of composite panels in which polyurethane rigid foam is the main insulant. This European Standard specifies product characteristics and includes procedures for testing, evaluation of conformity, marking and labelling. Products covered by this European Standard are also used in prefabricated thermal insulation systems and composite panels; the performance of systems incorporating these products is not covered. This European Standard does not specify the required class/level of a given property to be achieved by a product to demonstrate fitness for purpose in a particular application. The classes/levels required for a given application are to be found in regulations or non-conflicting standards. Products with a declared thermal resistance lower than 0,05 m2.K/W or a declared thermal conductivity greater than 0,1 W/(m.K) at 10 ℃ are not covered by this European Standard. This European Standard does not cover in situ insulation products, products intended to be used for the insulation of building equipment and industrial installations. This European Standard does not cover the acoustical aspect of impact noise transmission.

DIN EN 13165:2009 history

• 2018 DIN EN 13165/A3:2018 Thermal insulation products for buildings - Factory made rigid polyurethane foam (PU) products - Specification; German and English version EN 13165:2012+A2:2016/prA3:2018
• 2016 DIN EN 13165:2016-09 Thermal insulation products for buildings - Factory made rigid polyurethane foam (PU) products - Specification; German version EN 13165:2012+A2:2016 / Note: To be amended by DIN EN 13165/A3 (2018-09).
• 2016 DIN EN 13165:2016 Thermal insulation products for buildings - Factory made rigid polyurethane foam (PU) products - Specification; German version EN 13165:2012+A2:2016
• 2015 DIN EN 13165:2015 Thermal insulation products for buildings - Factory made rigid polyurethane foam (PU) products - Specification; German version EN 13165:2012+A1:2015
• 2013 DIN EN 13165:2013 Thermal insulation products for buildings - Factory made rigid polyurethane foam (PU) products - Specification; German version EN 13165:2012
• 2009 DIN EN 13165:2009 Thermal insulation products for buildings - Factory made rigid polyurethane foam (PUR) products - Specification; English version of DIN EN 13165:2009-02
• 2006 DIN EN 13165 Berichtigung 1:2006 Thermal insulation products for buildings – Factory manufactured rigid polyurethane foam (PUR) products – Specification
• 2005 DIN EN 13165:2005 Thermal insulation products for buildings – Factory manufactured rigid polyurethane foam (PUR) products – Specification
• 2001 DIN EN 13165:2001 Thermal insulation products for buildings — Factory made rigid polyurethane foam (PUR) products — Specification