This standard gives guidance on writing the technical specification for the procurement of equipment for use in
electricity generating stations (power stations). This Guide for procurement is not applicable to equipment for use in
the nuclear reactor plant area of nuclear power stations. Other possible applications of such equipment have not
been considered in the preparation of this Guide.
This Guide on cabling systems deals with a wide range of activities and may be used for any or all of these activities
by selection of the relevant parts e.g.:
- provision of support for cable;
- laying of cable;
- completion of cable ends;
The Guide covers the installation of power cable up to and including 20,8/36 (42) kV and the supply and installation of
control and instrumentation cable. The supply of power cable is covered by EN 45510-2-8.
The Guide includes the installation of protective conductor cable for earthing and equipotential bonding up to the main
earthing busbar(s), but not the below ground earth-electrode network.
The equipment covered by this Guide is defined by its function rather than design type. Therefore, the guidance to
the specification is stated in performance terms rather than being specified by a detailed description of the
equipment to be supplied.
This Guide indicates to potential purchasers how their specification should be prepared so that
- the equipment type and capacity interfaces correctly with other elements of the systems,
- predicted performance is achieved,
- ancillary equipment is properly sized,
- reliability, availability and safety requirements are achieved,
- proper consideration is given to the evaluation process and the quality measures to be applied.
This Guide does not determine the type of specification (e.g. detailed, performance, functional) or the extent of
supply for any given contract which is normally decided on the basis of the purchaser's project strategy. It does not
cover
- any commercial, contractual or legal issues which are normally in separate parts of an enquiry,
- any allocation of responsibilities which are determined by the contract.
This Guide does not prescribe the arrangement of the documents in the enquiry.
NOTE As a comprehensive European environmental policy is still under preparation, this Guide does not address the
environmental implications of the equipment.
BS EN 45510-2-9:2008 Referenced Document
EN 45510-2-8 Guide for procurement of power station equipment - Part 2-8: Electrical equipment - Power cables
EN 50086-2-4 Conduit Systems for Cable Management - Part 2-4: Particular Requirements for Conduit Systems Buried Underground (Incorporates Amendment A1: 2001; Incorporating Corrigendum February 2001)
EN 50262 Cable glands for electrical installations (Incorporates Amendments A1: 2001 and A2: 2004)
EN 50386 Bushings up to 1 kV and from 250 A to 5 kA, for liquid filled transformers (Incorporates Amendment A1: 2013)*, 2024-04-19 Update
EN 54 Components of automatic fire detection systems; Part 9: Fire sensitivity test
EN 60228 Conductors of insulated cables IEC 60228:2004; Supersedes HD 383 S2:1986 + A1:1989 + A2:1993
EN 60529 Degrees of Protection Provided by Enclosures (IP Code) (Incorporates Amendments A1: 2000 and A2: 2013)
EN 60584-3 Thermocouples - Part 3: Extension and compensating cables - Tolerances and identification system
EN 60702-1 Mineral Insulated Cables and Their Terminations with a Rated Voltage Not Exceeding 750 V Part 1: Cables (Incorporates Amendment A1: 2015)
EN 61196-3 Radio Frequency Cables Part 3: Sectional Specification for Coaxial Cables for Local Area Networks
EN 61238-1 Compression and mechanical connectors for power cables for rated voltages up to 36 kV (Um = 42 kV) Part 1: Test methods and requirements
EN 61537 Cable management - Cable tray systems and cable ladder systems
EN ISO 9001 Quality management systems - Requirements - Amendment 1: Climate action changes (ISO 9001:2015/Amd 1:2024)
EN ISO 9002 Quality Systems - Model for Quality Assurance in Production, Installation and Servicing (ISO 9002 : 1994) (Supersedes EN 29002 : 1987) Superseded by EN ISO 9001:2000
HD 21.3 Polyvinyl Chloride (PVC) Insulated Cables and Flexible Cords of Rated Voltage Uo/U up to and Including 450/750v
BS EN 45510-2-9:2008 history
2008BS EN 45510-2-9:2008 Guide for procurement of power station equipment-Part 2-9: Electrical equipment - Cabling systems