GB/T 17213.5-2008
Industrial-process control valves. Part 5:Marking (English Version)

Standard No.
GB/T 17213.5-2008
Language
Chinese, Available in English version
Release Date
2008
Published By
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China
Latest
GB/T 17213.5-2008
Replace
GB/T 17213.5-1998
Scope
This part of GB/T 17213 specifies the mandatory marking and supplementary marking of control valves. Some mandatory signs may not apply to some control valves with special structures, while some supplementary signs may only apply to special types of control valves. This section suggests that, unless otherwise agreed between the manufacturer and the buyer, the markings of various valves should comply with the provisions of this section.

GB/T 17213.5-2008 Referenced Document

  • EN 1333 Flanges and their joints - Pipework components - Definition and selection of PN
  • EN 19 Industrial valves - Marking of metallic valves*， 2023-11-15 Update
  • GB/T 17213.1 Industrial process control valves - Part 1: Terminology and general principles for control valves*， 2016-07-01 Update

GB/T 17213.5-2008 history

Industrial-process control valves. Part 5:Marking

GB/T 17213.5-2008 -All Parts

GB/T 17213.1-2015 Industrial process control valves - Part 1: Terminology and general principles for control valves GB/T 17213.10-2015 Industrial-process control valves.Part 2-4:Flow capacity.Inherent flow characteristics and rangeability GB/T 17213.11-2005 Industrial-process control valves.Part 3-2: Dimensions.Face to face dimensions for rotary control valves except butterfly valves GB/T 17213.12-2005 Industrial-process control valves.Part 3-3: Dimensions.End-to-end dimensions for buttweld,two-way,globe-type,straight pattern control valves GB/T 17213.13-2005 Industrial-process control valves.Part 6-2: Mounting details for attachment of positioners to control valves.Positioner mounting on linear actuators GB/T 17213.14-2018 Industrial-process control valves—Part 8-2: Noise considerations—Laboratory measurement of noise generated by hydrodynamic flow through control valves GB/T 17213.15-2017 Industrial-process control valves—Part 8-3: Noise considerations—Control valve aerodynamic noise prediction method GB/T 17213.16-2015 Industrial process control valves - Part 8-4: Noise considerations Noise prediction method for hydraulic flow through control valves GB/T 17213.17-2010 Industrial-Process control valves.Part 2-5:Flow capacity.Sizing equations for fluid flow through multistage control valves with interstage recovery GB/T 17213.18-2015 Industrial-process control valves.Part 9:Test procedure for response measurements from step inputs GB/T 17213.2-2017 Industrial-process control valves—Part 2-1: Flow capacity—Sizing equations for fluid flow under installed conditions GB/T 17213.3-2005 Industrial-process control valves.Part 3-1:Dimensions.Face-to-face dimensions for flanged,two-way,globe-type,straight pattern and center-to-face dimensions for flanged,two-way,globe-type,angle pattern control valves GB/T 17213.4-2015 Industrial process control valves - Part 4: Inspection and routine tests GB/T 17213.5-2008 Industrial-process control valves. Part 5:Marking GB/T 17213.6-2005 Industrial-process control valves.Part 6-1: Mounting details for attachment of positioners to control valves.Positioner mounting on linear actuators GB/T 17213.7-2017 Industrial-process control valves—Part 7: Control valve data sheet GB/T 17213.8-2015 Industrial process control valves - Part 8-1: Noise considerations for laboratory measurements of noise generated by aerodynamic flow through control valves GB/T 17213.9-2005 Industrial-process control valves.Part 2-3: Flow capacity.Test procedures


Copyright ©2024 All Rights Reserved