For purposes of determining compliance with the specified limits for requirements of the properties listed in the following table, an observed value or a calculated value shall be rounded as indicated in accordance with the rounding method of Practice E 29
Property Rounded Unit for Observed or
Calculated ValueChemical composition nearest unit in the last righthand place
of figuresTensile strength and yield strength nearest ksi (Nearest 5 MPa) Grain size: Up to 0.055 mm, incl.,
Over 0.055 mmnearest multiple of 0.005 mm
to the nearst 0.010 mmExpansion: Nearest 1 %
1.1 This specification covers welded tube of copper and various copper alloys up to 31/8in., inclusive, in diameter, for use in surface condensers, evaporators, heat exchangers, and general engineering applications. The following coppers or copper alloys are involved:
Copper or Copper Alloy UNS No.2 | Previously Used Designation | Type of Metal |
C10800A | ... | oxygen-free, low phosphorus |
C12200A | DHP phosphorized, high residual phosphorus | |
C19400 | ... | copper-iron alloy |
C23000 | ... | red brass |
C44300 | ... | arsenical admiralty |
C44400 | ... | antimonial admiralty |
C44500 | ... | phosphorized admiralty |
C68700 | ... | arsenical aluminum brass |
C70400 | ... | 95-5 copper-nickel |
C70600 | ... | 90-10 copper-nickel |
C70620 | ... | 90-10 copper-nickel (Modified for Welding) |
C71000 | ... | 80-20 copper-nickel |
C71500 | ... | 70-30 copper-nickel |
C71520 | ... | 70ASTM B543-07e1 history
Copyright ©2024 All Rights Reserved |