SAE AMS4312D-2008
Aluminum Alloy, Rolled or Forged Rings 1.0Mg-0.60Si-0.28Cu-0.20Cr (6061-T651, 6061-T652) Solution Heat Treated, Mechanically Stress Relieved, and Precipitation Heat Treated

Standard No.

SAE AMS4312D-2008

Release Date

2008

Published By

Society of Automotive Engineers (SAE)

Status

Be replaced

Replace By

SAE AMS4312D-2013

Latest

SAE AMS4312E-2022

Scope

1.1 FormThis specification covers an aluminum alloy in the form of rolled or forged rings.1.2 ApplicationThese rings have been used typically for structural applications requiring material with moderate strength and excellentresistance to stress-corrosion cracking and where good stability is required during machining, but usage is not limited tosuch applications. Alloy is further characterized by excellent fusion weldability.1.3 ClassificationRings covered by this specification are classified by type of mechanical stress relief as follows:Type 1 Stress relieved by stretching (6061T651)Type 2 Stress relieved by compression (6061T652)1.3.1 Either type may be supplied, unless a specific type is ordered.

SAE AMS4312D-2008 Referenced Document

• ASTM B594 Standard Practice for Ultrasonic Inspection of Aluminum-Alloy Wrought Products for Aerospace Applications
• ASTM B660 Standard Practices for Packaging/Packing of Aluminum and Magnesium Products
• ASTM B666/B666M Standard Practice for Identification Marking of Aluminum and Magnesium Products
• SAE AMS2355 TENSILE TESTING OF WROUGHT ALUMINUM AND MAGNESIUM PRODUCTS Except Forgings
• SAE AMS2772 Heat Treatment of Aluminum Alloy Raw Materials (01 1997)

SAE AMS4312D-2008 history

• 2022 SAE AMS4312E-2022 Aluminum Alloy, Rolled or Forged Rings 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr (6061-T651, 6061-T652) Solution Heat Treated, Mechanically Stress Relieved, and Precipitation Heat Treated
• 2013 SAE AMS4312D-2013 Aluminum Alloy, Rolled or Forged Rings 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr (6061-T651, 6061-T652) Solution Heat Treated, Mechanically Stress Relieved, and Precipitation Heat Treated
• 2008 SAE AMS4312D-2008 Aluminum Alloy, Rolled or Forged Rings 1.0Mg-0.60Si-0.28Cu-0.20Cr (6061-T651, 6061-T652) Solution Heat Treated, Mechanically Stress Relieved, and Precipitation Heat Treated
• 2006 SAE AMS4312C-2006 Aluminum Alloy, Rolled or Forged Rings 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr (6061-T651, 6061-T652) Solution Heat Treated, Mechanically Stress Relieved, and Precipitation Heat Treated
• 2000 SAE AMS4312C-2000 Aluminum Alloy, Rolled or Forged Rings 1.0Mg 0.60Si 0.28Cu 0.20Cr (6061-T651, 6061-T652) Solution Heat Treated, Mechanically Stress Relieved, and Precipitation Heat Treated
• 1994 SAE AMS4312B-1994 Aluminum Alloy@ Rolled or Forged Rings 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr (6061-T651@ 6061-T652) Solution Heat Treated@ Mechanically Stress Relieved@ and Precipitation Heat Treated (UNS A96061)
• 1988 SAE AMS4312A-1988 ALUMINUM ALLOY RINGS@ ROLLED OR FORGED 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr - (6061-T651@ 6061-T652) Solution Heat Treated@ Mechanically Stress Relieved@ and Precipitation Heat Treated (UNS A96061)
• 1977 SAE AMS4312-1977 ALUMINUM ALLOY RINGS@ ROLLED OR FORGED 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr (6061-T651@ 6061-T652) Mechanically Stress Relieved (UNS A96061)