This European Standard gives requirements for the design, fabrication, inspection, testing and verification of
GRP tanks and vessels with or without Thermoplastics lining for storage or processing of fluids, factory made
or site built, non pressurised or pressurised up to 10 bar, for use above ground.
The terms vessels and tanks as used in this European Standard include branches up to the point of
connection to pipe work or other equipment by bolting and supports, brackets or other attachments bonded
directly to the shell. In addition to the definitive requirements, this European Standard also requires the items
in Clause 5 to be fully documented.
This European Standard covers vessels and tanks subject to temperatures between - 40 ℃ and + 120 ℃.
NOTE It is possible that future advances in resin technology would allow tanks and vessels to be considered for
operating temperatures above + 120 ℃. Should such a situation arise and a manufacturer wishes to take advantage of
such developments, then all other requirements of the standard shall be maintained and such tanks and vessels shall only
be designed in accordance with the advanced design method given in 7.8.3.
Excluded from this European Standard are:
-- tanks and vessels for the transport of fluids;
-- underground storage tanks;
-- spherical vessels;
-- vessels and tanks of irregular shape;
-- tanks and vessels with double containment;
-- tanks and vessels which are subject to the risk of explosion, or failure of which may cause an emission of
radioactivity;
-- specification for fibre reinforced cisterns of one piece and sectional construction for the storage, above
ground, of cold water (see EN 13280:2001).
DIN EN 13121-3:2008 history
2022DIN EN 13121-3:2022-11 GRP tanks and vessels for use above ground - Part 3: Design and workmanship; German and English version prEN 13121-3:2022 / Note: Date of issue 2022-10-07*Intended as replacement for DIN EN 13121-3 (2016-10).
2022DIN EN 13121-3:2022 GRP tanks and vessels for use above ground - Part 3: Design and workmanship; German and English version prEN 13121-3:2022
2016DIN EN 13121-3:2016-10 GRP tanks and vessels for use above ground - Part 3: Design and workmanship; German version EN 13121-3:2016 / Note: To be replaced by DIN EN 13121-3 (2022-11).
2016DIN EN 13121-3:2016 GRP tanks and vessels for use above ground - Part 3: Design and workmanship; German version EN 13121-3:2016
2010DIN EN 13121-3:2010 GRP tanks and vessels for use above ground - Part 3: Design and workmanship; German version EN 13121-3:2008+A1:2010
2008DIN EN 13121-3:2008 GRP tanks and vessels for use above ground - Part 3: Design and workmanship; German version EN 13121-3:2008
1970DIN EN 13121-3 E:2001-07 GRP tanks and vessels for use above ground - Part 3: Design and workmanship