ISO 22915-10:2008 Industrial trucks - Verification of stability - Part 10: Additional stability test for trucks operating in the special condition of stacking with load laterally displaced by powered devices
ISO 22915 deals with the safety of industrial trucks, as defined in ISO 5053, relative to their stability and the
verification of that stability. For the purposes of ISO 22915, industrial trucks are wheeled, self-propelled or
pedestrian-propelled vehicles, excepting those running on rails. They are either operator-controlled or
driverless and designed to carry, tow, push, lift, stack or tier in racks.
This part of ISO 22915 specifies an additional test for verifying the stability of a laden truck fitted with a
powered load-handling device, such as a sideshift, which can displace the centre of gravity to a substantial,
predetermined extent from the longitudinal centre plane of the truck. Such devices are used in that mode for
depositing and retrieving a load with the mast vertical or raised to maximum boom angle and extension.
A displacement is considered to be a substantial displacement if it is more than
-- 100 mm, for a truck with a rated capacity < 5 000 kg,
150 mm, for a truck with a rated capacity ≥ 5 000 kg and ≤ 10 000 kg,
-- 250 mm, for a truck with a rated capacity > 10 000 kg and < 20 000 kg,
350 mm, for a truck with a rated capacity ≥ 20 000 kg.
ISO 22915-10:2008 Referenced Document
ISO 22915-1 Industrial trucks - Verification of stability - Part 1: General*, 2016-01-01 Update
ISO 22915-2 Industrial trucks - Verification of stability - Part 2: Counterbalanced trucks with mast*, 2018-08-31 Update
ISO 22915-3 Industrial trucks - Verification of stability - Part 3: Reach and straddle trucks*, 2021-05-31 Update
ISO 22915-4 Industrial trucks — Verification of stability — Part 4: Pallet stackers, double stackers and order-picking trucks with operator position elevating up to and including 1 200 mm lift height*, 2018-10-29 Update
ISO 22915-7 Industrial trucks - Verification of stability - Part 7: Bidirectional and multidirectional trucks*, 2016-08-01 Update
ISO 3691-1 Industrial trucks — Safety requirements and verification — Part 1: Self-propelled industrial trucks, other than driverless trucks, variable-reach trucks and burden-carrier trucks — Amendment 2
ISO 5053 Powered industrial trucks; Terminology Bilingual edition
ISO 22915-10:2008 history
2023ISO 22915-10:2023 Industrial trucks — Verification of stability — Part 10: Additional stability test for trucks operating in the special condition of stacking with load laterally displaced by powered devices
2008ISO 22915-10:2008 Industrial trucks - Verification of stability - Part 10: Additional stability test for trucks operating in the special condition of stacking with load laterally displaced by powered devices