DIN EN ISO 17632:2008
Welding consumables - Tubular cored electrodes for gas shielded and non-gas shielded metal arc welding of non-alloy and fine grain steels - Classification (ISO 17632:2004); German version EN ISO 17632:2008

Standard No.

DIN EN ISO 17632:2008

Release Date

2008

Published By

German Institute for Standardization

Status

Be replaced

Replace By

DIN EN ISO 17632:2016

DIN EN ISO 17632 E:2013

Latest

DIN EN ISO 17632:2016-05

Replace

DIN EN ISO 17632:2007 DIN EN 758:1997

Scope

This International Standard specifies requirements for classification of tubular cored electrodes with or without a gas shield for metal arc welding of non-alloy and fine grain steels in the as-welded condition or in the post- weld heat-treated condition with a minimum yield strength of up to 500 MPa or a minimum tensile strength of up to 570 MPa. One tubular cored electrode can be tested and classified with different shielding gases, if any. This international Standard is a combined specification providing classification utilizing a system based upon the yield strength and the average impact energy of 47 J of all-weld metal, or utilizing a system based upon the tensile strength and the average impact energy of 27 J of all-weld metal. 1) Paragraphs and tables which carry the suffix letter "A" are applicable only to tubular cored electrodes classified to the system based upon the yield strength and the average impact energy of 47 J of all- weld metal in accordance with this international Standard. 2) Paragraphs and tables which carry the suffix letter "B" are applicable only to tubular cored electrodes classified to the system based upon the tensile strength and the average impact energy of 27 J of all- weld metal in accordance with this International Standard. 3) Paragraphs and tables which have neither the suffix letter "A" nor the suffix letter "B" are applicable to all tubular cored electrodes classified in accordance with this International Standard. It is recognized that the operating characteristics of tubular cored electrodes can be modified by the use of pulsed current, but for the purposes of this International Standard, pulsed current is not permitted for determining the electrode classification.

DIN EN ISO 17632:2008 Referenced Document

• ISO 13916 Welding - Measurement of preheating temperature, interpass temperature and preheat maintenance temperature*， 2017-10-01 Update
• ISO 14175:1997 Welding consumables - Shielding gases for arc welding and cutting
• ISO 14344 Welding consumables - Procurement of filler materials and fluxes*， 2010-02-01 Update
• ISO 15792-1:2000 Welding consumables - Test methods - Part 1: Test methods for all-weld metal test specimens in steel, nickel and nickel alloys
• ISO 15792-2:2000 Welding consumables - Test methods - Part 2: Preparation of single-run and two-run technique test specimens in steel
• ISO 15792-3 Welding consumables - Test methods - Part 3: Classification testing of positional capacity and root penetration of welding consumables in a fillet weld*， 2011-05-15 Update
• ISO 31-0:1992 Quantities and units; part 0: general principles
• ISO 3690 Welding and allied processes - Determination of hydrogen content in arc weld metal*， 2018-06-30 Update
• ISO 544 Welding consumables - Technical delivery conditions for filler materials and fluxes - Type of product, dimensions, tolerances and markings*， 2017-10-31 Update
• ISO 6847 Welding consumables — Deposition of a weld metal pad for chemical analysis*， 2020-08-21 Update
• ISO 6947:1990 Welds; working positions; definitions of angles of slope and rotation (revision of ISO 6947:1980)

DIN EN ISO 17632:2008 history

• 2016 DIN EN ISO 17632:2016-05 Welding consumables - Tubular cored electrodes for gas shielded and non-gas shielded metal arc welding of non-alloy and fine grain steels - Classification (ISO 17632:2015); German version EN ISO 17632:2015
• 2016 DIN EN ISO 17632:2016 Welding consumables - Tubular cored electrodes for gas shielded and non-gas shielded metal arc welding of non-alloy and fine grain steels - Classification (ISO 17632:2015); German version EN ISO 17632:2015
• 2008 DIN EN ISO 17632:2008 Welding consumables - Tubular cored electrodes for gas shielded and non-gas shielded metal arc welding of non-alloy and fine grain steels - Classification (ISO 17632:2004); German version EN ISO 17632:2008
• 0000 DIN EN ISO 17632:2007
• 1970 DIN EN 758:1997

DIN EN ISO 17632:2008 Welding consumables - Tubular cored electrodes for gas shielded and non-gas shielded metal arc welding of non-alloy and fine grain steels - Classification (ISO 17632:2004); German version EN ISO 17632:2008 has been changed from DIN EN 758:1997 .