ASTM E1834-96(2002)
Standard Test Method for Determination of Lead in Nickel Alloys by Electrothermal Atomic Absorption Spectrometric Method

Standard No.

ASTM E1834-96(2002)

Release Date

1996

Published By

American Society for Testing and Materials (ASTM)

Status

Be replaced

Replace By

ASTM E1834-09

Latest

ASTM E1834-18

Scope

This test method is intended to be used for the determination of trace levels of lead in nickel and nickel alloys. It is assumed that the procedure will be performed by trained analysts capable of performing common laboratory practices skillfully and safely. It is expected that the work will be performed in a properly equipped laboratory and proper waste disposal procedures will be followed.

1.1 This test method covers the determination of lead in nickel and nickel alloys in the concentration range of 0.00005 % to 0.001 % by electrothermal atomic absorption spectrometry.

Note 18212;If this test method is used to test materials having contents less than 0.0001 % lead, users in different laboratories will experience more than the usual 5 % risk that their results will differ by more than 50 % relative error.

1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. For specific hazards associated with the use of this practice see Practices E 50.

ASTM E1834-96(2002) Referenced Document

• ASTM E1184 Standard Practice for Electrothermal (Graphite Furnace) Atomic Absorption Analysis*， 1998-04-19 Update
• ASTM E1452 
• ASTM E1601 Standard Practice for Conducting an Interlaboratory Study to Evaluate the Performance of an Analytical Method*， 1998-04-19 Update
• ASTM E1770 Standard Practice for Optimization of Electrothermal Atomic Absorption Spectrometric Equipment*， 2006-06-01 Update
• ASTM E50 Standard Practice for Apparatus, Reagents, and safety Precautions for Chemical Analysis of Metals

ASTM E1834-96(2002) history

• 2018 ASTM E1834-18 Standard Test Method for Analysis of Nickel Alloys by Graphite Furnace Atomic Absorption Spectrometry
• 2011 ASTM E1834-11 Standard Test Method for Analysis of Nickel Alloys by Graphite Furnace Atomic Absorption Spectrometry
• 2009 ASTM E1834-09 Standard Test Method for Determination of Lead in Nickel Alloys by Graphite Furnace Atomic Absorption Spectrometry
• 1996 ASTM E1834-96(2002) Standard Test Method for Determination of Lead in Nickel Alloys by Electrothermal Atomic Absorption Spectrometric Method
• 1996 ASTM E1834-96 Standard Test Method for Determination of Lead in Nickel Alloys by Electrothermal Atomic Absorption Spectrometric Method