ASTM C1268-94(2000)
Standard Test Method for Quantitative Determination of Americium 241 in Plutonium by Gamma-Ray Spectrometry
- Standard No.
- ASTM C1268-94(2000)
- Release Date
- 1994
- Published By
- American Society for Testing and Materials (ASTM)
- Status
- Replace By
- ASTM C1268-94(2008)
- Latest
- ASTM C1268-23
- Scope
This test method allows the determination of americium 241 in a plutonium solution without separation of the americium from the plutonium. It is generally applicable to any solution containing americium 241.
The americium 241 in solid plutonium materials may be determined when these materials are dissolved (see Practice C 1168
). When the plutonium solution contains unacceptable levels of fission products or other materials, this method may be used following a tri-n-octylphosphine oxide (TOPO) extraction, ion exchange or other similar separation techniques (see Test Methods C 758 and C 759
). This test method is less subject to interferences from plutonium than alpha counting since the energy of the gamma ray used for the analysis is better resolved from other gamma rays than the alpha particle energies used for alpha counting.
The minimal sample preparation reduces the amount of sample handling and exposure to the analyst.
This test method is applicable only to homogeneous solutions. This test method is not suitable for solutions containing solids.
Solutions containing as little as 1 × 10 −5 g/L americium 241 may be analyzed using this method. The lower limit depends on the detector used and the counting geometry. Solutions containing high concentrations may be analyzed following an appropriate dilution.
1.1 This test method covers the quantitative determination of americium 241 by gamma-ray spectrometry in plutonium nitrate solution samples that do not contain significant amounts of radioactive fission products or other high specific activity gamma-ray emitters.
1.2 This test method can be used to determine the americium 241 in samples of plutonium metal, oxide and other solid forms, when the solid is appropriately sampled and dissolved.
1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
ASTM C1268-94(2000) Referenced Document
- ASTM C1009 Standard Guide for Establishing a Quality Assurance Program for Analytical Chemistry Laboratories Within the Nuclear Industry *， 1996-04-19 Update
- ASTM C1168 Standard Practice for Preparation and Dissolution of Plutonium Materials for Analysis
- ASTM C758 Standard Test Methods for Chemical, Mass Spectrometric, Spectrochemical, Nuclear, and Radiochemical Analysis of Nuclear-Grade Plutonium Metal*， 1998-04-19 Update
- ASTM C759 Standard Test Methods for Chemical, Mass Spectrometric, Spectrochemical, Nuclear, and Radiochemical Analysis of Nuclear-Grade Plutonium Nitrate Solutions*， 1998-04-19 Update
- ASTM C859 Standard Terminology Relating to Nuclear Materials
- ASTM C982 Standard Guide for Selecting Components for Energy-Dispersive X-Ray Fluorescence (XRF) Systems
- ASTM E181 Standard Test Methods for Detector Calibration and Analysis of Radionuclides*， 1998-04-19 Update
ASTM C1268-94(2000) history
- 2023 ASTM C1268-23 Standard Test Method for Quantitative Determination of 241Am in Plutonium by Gamma-Ray Spectrometry
- 2015 ASTM C1268-15 Standard Test Method for Quantitative Determination of 241Am in Plutonium by Gamma-Ray Spectrometry
- 1994 ASTM C1268-94(2008) Standard Test Method for Quantitative Determination of Americium 241 in Plutonium by Gamma-Ray Spectrometry
- 1994 ASTM C1268-94(2000) Standard Test Method for Quantitative Determination of Americium 241 in Plutonium by Gamma-Ray Spectrometry
