ASTM E287-02(2007)
Standard Specification for Laboratory Glass Graduated Burets
- Standard No.
- ASTM E287-02(2007)
- Release Date
- 2002
- Published By
- American Society for Testing and Materials (ASTM)
- Status
- Replace By
- ASTM E287-02(2012)
- Latest
- ASTM E287-02(2019)
- Scope
1.1 This specification covers requirements for glass burets of precision and general-purpose grades suitable for laboratory use.
1.1.1 Class A Each buret of precision grade may be marked with the letter "A" to signify compliance with applicable construction and accuracy requirements in Table 1 and Table 2 . Each buret may be marked with a permanent serial number at the option of the manufacturer.
1.1.2 Class B General purpose burets are of the same basic design as Class A burets. However, volumetric tolerances for Class B burets shall be within twice the specified range allowed for Class A burets. These burets need not be marked with their class designation or serial number. SeeTable 1 and Table 3 for tolerances and dimensional requirements. Note 1The Twelfth General (International) Conference on Weights and Measures redefined the litre as a "special name for the cubic decimetre," but agreed to permit continuance of the terms litre, millilitre, and mL, except in association with measurements of the highest precision. For volumetric glassware the difference between the old and new meanings of litre is negligible. Therefore, either mL or cm3 may be marked on ware covered by this standard.
1.1.3 Product with a stated capacity not listed in this standard may be specified Class A Tolerance when product conforms to the tolerance range of the next smaller volumetric standard product listed in Table 1 .
ASTM E287-02(2007) Referenced Document
- ASTM D664 Standard Test Method for Acid Number of Petroleum Products by Potentiometric Titration
- ASTM E1133 Standard Practice for Performance Testing of Packaged Laboratory Apparatus for United States Government Procurements
- ASTM E1157 Standard Specification for Sampling and Testing of Reusable Laboratory Glassware
- ASTM E675 Standard Specification for Interchangeable Taper-Ground Stopcocks And Stoppers
- ASTM E911 Standard Specification for Glass Stopcocks with Polytetrafluoroethylene (PTFE) Plugs*， 2024-04-19 Update
- ASTM E920 Standard Specification for Commercially Packaged Laboratory Apparatus
- ASTM E921 Standard Specification for Export Packaged Laboratory Apparatus
ASTM E287-02(2007) history
- 2019 ASTM E287-02(2019) Standard Specification for Laboratory Glass Graduated Burets
- 2012 ASTM E287-02(2012) Standard Specification for Laboratory Glass Graduated Burets
- 2002 ASTM E287-02(2007) Standard Specification for Laboratory Glass Graduated Burets
- 2002 ASTM E287-02 Standard Specification for Laboratory Glass Graduated Burets
- 1994 ASTM E287-94(1998) Standard Specification for Laboratory Glass Graduated Burets
