ASTM D4812-05
Standard Test Method for Unnotched Cantilever Beam Impact Strength of Plastics

Standard No.
ASTM D4812-05
Release Date
2005
Published By
American Society for Testing and Materials (ASTM)
Status
Replace By
ASTM D4812-06
Latest
ASTM D4812-19e1
Scope

1.1 This test method covers the determination of the resistance of plastics to breakage by flexural shock, as indicated by the energy extracted from standardized pendulum-type hammers, mounted in standardized machines, in breaking standard specimens with one pendulum swing. The result of this test method is reported as energy absorbed per unit of specimen width.

Note 1

The pendulum-type test instruments have been standardized in that they must comply with certain requirements, including a fixed height of hammer fall that results in a substantially fixed velocity of the hammer at the moment of impact. Pendulums of different initial energies (produced by varying their effective weights) are recommended for use with specimens of different impact strengths. Moreover, manufacturers of the equipment are permitted to use different lengths and constructions of pendulums (with resulting possible differences in pendulum rigidities (see Section ), and other differences in machine design).

1.2 The values stated in SI units are to be regarded as standard. The values given in brackets are for information only.

This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Note 2

This standard and ISO 180, Method 1U, are similar in content but are not technically equivalent.

ASTM D4812-05 history

  • 2019 ASTM D4812-19e1 Standard Test Method for Unnotched Cantilever Beam Impact Resistance of Plastics
  • 2019 ASTM D4812-19 Standard Test Method for Unnotched Cantilever Beam Impact Resistance of Plastics
  • 2011 ASTM D4812-11 Standard Test Method for Unnotched Cantilever Beam Impact Resistance of Plastics
  • 2006 ASTM D4812-06 Standard Test Method for Unnotched Cantilever Beam Impact Resistance of Plastics
  • 2005 ASTM D4812-05 Standard Test Method for Unnotched Cantilever Beam Impact Strength of Plastics
  • 1999 ASTM D4812-99 Standard Test Method for Unnotched Cantilever Beam Impact Strength of Plastics



Copyright ©2024 All Rights Reserved