ASTM E1520-99(2004)
Standard Test Method for Particle Counts Per Pound of Granular Carriers and Dry-Applied Granular Formulations

Standard No.

ASTM E1520-99(2004)

Release Date

1999

Published By

American Society for Testing and Materials (ASTM)

Status

Be replaced

Replace By

ASTM E1520-99(2009)

Latest

ASTM E1520-23

Scope

This test method was designed principally for clay granular carriers and clay-based granular formulations, but need not be limited to these materials.

This procedure is applicable to granules in the range from 8 to 60 mesh (2.36 to 0.25 mm).

The sieve sizes used to calculate total particle count will be called the desired range and should be specified as part of the test results.

1.1 This test method is used to determine the number of particles per pound of granular carriers and granular pesticide formulations.

1.2 This standard does not purport to address all of the safety problems, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. For specific precautionary statements, see Section 6.

ASTM E1520-99(2004) history

• 2023 ASTM E1520-23 Standard Test Method for Particle Counts Per Pound of Granular Carriers and Dry-Applied Granular Formulations
• 1999 ASTM E1520-99(2015) Standard Test Method for Particle Counts Per Pound of Granular Carriers and Dry-Applied Granular Formulations
• 1999 ASTM E1520-99(2009) Standard Test Method for Particle Counts Per Pound of Granular Carriers and Dry-Applied Granular Formulations
• 1999 ASTM E1520-99(2004) Standard Test Method for Particle Counts Per Pound of Granular Carriers and Dry-Applied Granular Formulations
• 1999 ASTM E1520-99 Standard Test Method for Particle Counts Per Pound of Granular Carriers and Dry-Applied Granular Formulations