ASTM D5702-07
Standard Practice for Field Sampling of Coating Films for Analysis for Heavy Metals
- Standard No.
- ASTM D5702-07
- Release Date
- 2007
- Published By
- American Society for Testing and Materials (ASTM)
- Status
- Replace By
- ASTM D5702-07(2012)
- Latest
- ASTM D5702-18(2022)
- Scope
Prior to beginning a project that involves the removal, cutting, grinding, or burning of paint, it is necessary to determine if the coating contains hazardous materials, such as lead, as certain requirements for worker and environmental protection may need to be imposed. The presence and quantity of hazardous materials in a paint can be determined through laboratory analysis; however, since the analysis is based on the weight of the specimen, the removal of the sample must be properly controlled to improve the reliability of the test results. The number and location of samples to be removed must also be determined to characterize properly the extent of the presence of hazardous materials, if any, on a structure.
1.1 This practice covers a method to control the removal of samples of coating films from substrates for subsequent laboratory analysis for heavy metal content on a mass basis. This technique can be used in the field, the fabricating shop, or laboratory.
1.2 The values stated in SI units are to be regarded as the standard. The values in parentheses are for information only.
This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
For specific hazard information, see Section 5, Note 1 and Note 3.
ASTM D5702-07 Referenced Document
- ASTM D4138 Standard Test Methods for Measurement of Dry Film Thickness of Protective Coating Systems by Destructive Means
- ASTM D6132 Standard Test Method for Nondestructive Measurement of Dry Film Thickness of Applied Organic Coatings Over Concrete Using an Ultrasonic Gage
- ASTM D7091 Standard Practice for Nondestructive Measurement of Dry Film Thickness of Nonmagnetic Coatings Applied to Ferrous Metals and Nonmagnetic, Nonconductive Coatings Applied to Non-Ferrous Metals
ASTM D5702-07 history
- 2022 ASTM D5702-18(2022) Standard Practice for Field Sampling of Coating Films for Analysis for Heavy Metals
- 2018 ASTM D5702-18 Standard Practice for Field Sampling of Coating Films for Analysis for Heavy Metals
- 2007 ASTM D5702-07(2012) Standard Practice for Field Sampling of Coating Films for Analysis for Heavy Metals
- 2007 ASTM D5702-07 Standard Practice for Field Sampling of Coating Films for Analysis for Heavy Metals
- 2002 ASTM D5702-02 Standard Practice for Field Sampling of Coating Films for Analysis for Heavy Metals
- 1995 ASTM D5702-95 Standard Practice for Field Sampling of Coating Films for Analysis for Heavy Metals
