ASTM D4517-85(1999)
Standard Test Method for Low-Level Total Silica in High-Purity Water by Flameless Atomic Absorption Spectroscopy

Standard No.

ASTM D4517-85(1999)

Release Date

1985

Published By

American Society for Testing and Materials (ASTM)

Status

Be replaced

Replace By

ASTM D4517-04

Latest

ASTM D4517-15(2023)

Scope

1.1 This test method covers the determination of total silica in water.

1.2 This test method is applicable in the range from 25 to 250 [mu]g/L of silica as SiO . Higher concentrations may be determined by decreasing the aliquot volume (see Note 6). Concentration range should not be extended by dilution.

1.3 This test method determines total silica, and does not distinguish between soluble and insoluble forms.

1.4 This test method was tested on reagent water only. It is the user''s responsibility to assure the validity of the test method for waters of other matrices.

1.5 This standard does not purport to address the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

ASTM D4517-85(1999) history

• 2023 ASTM D4517-15(2023) Standard Test Method for Low-Level Total Silica in High-Purity Water by Flameless Atomic Absorption Spectroscopy
• 2015 ASTM D4517-15 Standard Test Method for Low-Level Total Silica in High-Purity Water by Flameless Atomic Absorption Spectroscopy
• 2009 ASTM D4517-04(2009) Standard Test Method for Low-Level Total Silica in High-Purity Water by Flameless Atomic Absorption Spectroscopy
• 2004 ASTM D4517-04 Standard Test Method for Low-Level Total Silica in High-Purity Water by Flameless Atomic Absorption Spectroscopy
• 1985 ASTM D4517-85(1999) Standard Test Method for Low-Level Total Silica in High-Purity Water by Flameless Atomic Absorption Spectroscopy