ASTM D664-06ae1
Standard Test Method for Acid Number of Petroleum Products by Potentiometric Titration

Standard No.
ASTM D664-06ae1
Release Date
2006
Published By
American Society for Testing and Materials (ASTM)
Status
Replace By
ASTM D664-07
Latest
ASTM D664-18e2
Scope

1.1 This test method covers procedures for the determination of acidic constituents in petroleum products and lubricants soluble or nearly soluble in mixtures of toluene and propan-2-ol. It is applicable for the determination of acids whose dissociation constants in water are larger than 10-9; extremely weak acids whose dissociation constants are smaller than 10 -9 do not interfere. Salts react if their hydrolysis constants are larger than 10-9. The range of acid numbers included in the precision statement is 0.1 mg/g KOH to 150 mg/g KOH.

Note 18212;In new and used oils, the constituents that may be considered to have acidic characteristics include organic and inorganic acids, esters, phenolic compounds, lactones, resins, salts of heavy metals, salts of ammonia and other weak bases, acid salts of polybasic acids, and addition agents such as inhibitors and detergents.

1.2 The test method may be used to indicate relative changes that occur in oil during use under oxidizing conditions regardless of the color or other properties of the resulting oil. Although the titration is made under definite equilibrium conditions, the test method is not intended to measure an absolute acidic property that can be used to predict performance of oil under service conditions. No general relationship between bearing corrosion and acid number is known.

Note 28212;The acid number obtained by this standard may or may not be numerically the same as that obtained in accordance with Test Methods D 974 and D 3339. There has not been any attempt to correlate this method with other non-titration methods.

1.3 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.

1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

ASTM D664-06ae1 history

  • 2018 ASTM D664-18e2 Test Method for Determination of Flexible Creep Hardness of Asphalt Binders Using a Bending Beam Rheometer
  • 2018 ASTM D664-18e1 Standard Test Method for Acid Number of Petroleum Products by Potentiometric Titration
  • 2018 ASTM D664-18 Standard Test Method for Acid Number of Petroleum Products by Potentiometric Titration
  • 2017 ASTM D664-17a Standard Test Method for Acid Number of Petroleum Products by Potentiometric Titration
  • 2017 ASTM D664-17 Standard Test Method for Acid Number of Petroleum Products by Potentiometric Titration
  • 2017 ASTM D664-11a(2017) Standard Test Method for Acid Number of Petroleum Products by Potentiometric Titration
  • 2011 ASTM D664-11ae1 Standard Test Method for Acid Number of Petroleum Products by Potentiometric Titration
  • 2011 ASTM D664-11a Standard Test Method for Acid Number of Petroleum Products by Potentiometric Titration
  • 2011 ASTM D664-11 Standard Test Method for Acid Number of Petroleum Products by Potentiometric Titration
  • 2009 ASTM D664-09a Standard Test Method for Acid Number of Petroleum Products by Potentiometric Titration
  • 2009 ASTM D664-09 Standard Test Method for Acid Number of Petroleum Products by Potentiometric Titration
  • 2007 ASTM D664-07 Standard Test Method for Acid Number of Petroleum Products by Potentiometric Titration
  • 2006 ASTM D664-06ae1 Standard Test Method for Acid Number of Petroleum Products by Potentiometric Titration
  • 2006 ASTM D664-06a Standard Test Method for Acid Number of Petroleum Products by Potentiometric Titration
  • 2006 ASTM D664-06 Standard Test Method for Acid Number of Petroleum Products by Potentiometric Titration
  • 2004 ASTM D664-04e1 Standard Test Method for Acid Number of Petroleum Products by Potentiometric Titration
  • 2004 ASTM D664-04 Standard Test Method for Acid Number of Petroleum Products by Potentiometric Titration
  • 2001 ASTM D664-01 Standard Test Method for Acid Number of Petroleum Products by Potentiometric Titration
  • 1995 ASTM D664-95(2001)e1 Standard Test Method for Acid Number of Petroleum Products by Potentiometric Titration
  • 1995 ASTM D664-95 Standard Test Method for Acid Number of Petroleum Products by Potentiometric Titration



Copyright ©2024 All Rights Reserved