JC/T 760-2008
Bathtub and shower faucets (English Version)
- Standard No.
- JC/T 760-2008
- Language
- Chinese, Available in English version
- Release Date
- 2008
- Published By
- Professional Standard - Building Materials
- Latest
- JC/T 760-2008
- Replace
- JC/T 760-1985
- Scope
- This standard specifies the terms and definitions of bathtubs and shower faucets (hereinafter referred to as faucets); classification, codes and markings; materials; technical requirements; test methods; inspection rules and markings, packaging, transportation and storage. This standard is applicable to all types of bathtubs and shower faucets with nominal diameters of DN15 and DN20, nominal pressures not greater than 1.0MPa, installed on cold and hot water supply pipelines in buildings, and medium temperatures not exceeding 90°C.
JC/T 760-2008 Referenced Document
- GB 18145-2003 Ceramic cartridge faucets
- GB/T 10125 Corrosion tests in artificial atmospheres—Salt spray tests*， 2021-08-20 Update
- GB/T 1176 Casting copper and copper alloys*， 2013-09-18 Update
- GB/T 17219 Standard for safety evaluation of equipment and protective materials in drinking water system
- GB/T 2828.1 Inspection procedure by count sampling part 1: Lot by lot inspection sampling plan retrieved by acceptance quality limit (AQL)*， 2013-02-15 Update
- GB/T 2829 Sampling procedures and tables for periodic inspection by attributes (Apply to inspection of process stability)
- GB/T 5593 Structure ceramic materials used in electronic component and device*， 2015-05-15 Update
- GB/T 6461 Methods for corrosion testing of metallic and other inorganic coatings on metallic substrates--Rating of test specimens and manufactured articles subjected to corrosion tests
- GB/T 7306.1 Pipe threads with 55 degree thread angle where pressure-tight joints are made on the threads Part 1:Parallel internal and taper external threads
- GB/T 7306.2 Pipe threads with 55 degree thread angle where pressure-tight joints are made on the threads Part 2:Taper internal and external threads
- GB/T 7307 Pipe threads with 55 degree thread angle where pressure-tight joints are not made on the threads
- GB/T 9286 Paints and varnishes—Cross-cut test*， 2021-08-20 Update
- HG/T 3091 Rubber seals.Joint rings for water supply,drainage and sewerage pipelines.Specification for materials
- HG/T 3097 Rubber seals Jonit rings for pipelines for hot-water supply up to 110℃. Specification for the materials
- JC 886 Hose for sanitary fittings
JC/T 760-2008 history
- 2008 JC/T 760-2008 Bathtub and shower faucets
- 1985 JC/T 760-1985 External fixed faucets of bathtub
