This standard specifies the classification, codes and markings of basin faucets; general requirements; technical requirements; test methods; inspection rules; marking, packaging, transportation and storage. This standard is applicable to basin faucets installed on cold and hot water supply pipelines in buildings, with a nominal pressure not greater than 1.0MPa and a medium temperature not greater than 90°C.
GB/T 17219 Standard for safety evaluation of equipment and protective materials in drinking water system
GB/T 2828.1 Inspection procedure by count sampling part 1: Lot by lot inspection sampling plan retrieved by acceptance quality limit (AQL)*, 2013-02-15 Update
GB/T 2829 Sampling procedures and tables for periodic inspection by attributes (Apply to inspection of process stability)
GB/T 6461 Methods for corrosion testing of metallic and other inorganic coatings on metallic substrates--Rating of test specimens and manufactured articles subjected to corrosion tests
GB/T 7306.1 Pipe threads with 55 degree thread angle where pressure-tight joints are made on the threads Part 1:Parallel internal and taper external threads
GB/T 7306.2 Pipe threads with 55 degree thread angle where pressure-tight joints are made on the threads Part 2:Taper internal and external threads
GB/T 7307 Pipe threads with 55 degree thread angle where pressure-tight joints are not made on the threads