This Standard covers thermoplastic and rubber tapes for use as electrical insulation at not more than 600 V and at 80鳦 (176鳩) and lower temperatures on joints and splices in wires and cables in accordance with the National Electrical CodeANSI/NFPA 70. It is intended that rubber tape on a joint or splice be mechanically protected by a covering such as friction tape. Thermoplastic tape is acceptable without the additional mechanical protection. 1.2 The characteristic constituent of the thermoplastic tape covered in this Standard is either PVC (polyvinyl chloride or a copolymer of vinyl chloride and vinyl acetate), or PE (thermoplastic polyethylene). For the characteristic constituent(s) of rubber tape, see 18.1.
UL 510 BULLETIN-2007 history
1970UL 510-2020 UL Standard for Safety Polyvinyl Chloride, Polyethylene, and Rubber Insulating Tape
2019UL 510 BULLETIN-2019 UL Standard for Safety Polyvinyl Chloride@ Polyethylene@ and Rubber Insulating Tape (COMMENTS DUE: April 5@ 2019)
2018UL 510 CRD-2018 UL Standard for Safety Polyvinyl Chloride@ Polyethylene@ and Rubber Insulating Tape - Section / Paragraph Reference: 22. Storage Test Subject: Revised Test Method for the Storage Test (Edition 9: May 12@ 2017)
2018UL 510 BULLETIN-2018 UL Standard for Safety Polyvinyl Chloride@ Polyethylene@ and Rubber Insulating Tape (COMMENTS DUE: July 23@ 2018)
2017UL 510 BULLETIN-2017 UL Standard for Safety Polyvinyl Chloride@ Polyethylene@ and Rubber Insulating Tape (COMMENTS DUE: MAY 8@ 2017)
2017UL 510-2017 UL Standard for Safety Polyvinyl Chloride@ Polyethylene@ and Rubber Insulating Tape (Ninth Edition)
2013UL 510 BULLETIN-2013 UL Standard for Safety Polyvinyl Chloride@ Polyethylene@ and Rubber Insulating Tape (COMMENTS DUE: May 02@ 2013)
2012UL 510 BULLETIN-2012 UL Standard for Safety Polyvinyl Chloride@ Polyethylene@ and Rubber Insulating Tape (COMMENTS DUE: August 31@ 2012)
2011UL 510 CRD-2011 UL Standard for Safety Polyvinyl Chloride@ Polyethylene@ and Rubber Insulating Tape - Section/Paragraph Reference: Multiple Subject: Insulating Tape for use in Electrical Devices (Edition 8; February 10@ 2005)
2007UL 510 BULLETIN-2007 UL Standard for Safety Polyvinyl Chloride, Polyethylene, and Rubber Insulating Tape COMMENTS DUE: December 7, 2007
2005UL 510 BULLETIN-2005 UL Standard for Safety Polyvinyl Chloride@ Polyethylene@ and Rubber Insulating Tape
2005UL 510-2005 UL Standard for Safety Polyvinyl Chloride, Polyethylene, and Rubber Insulating Tape Eighth Edition; Reprint with revisions through and including April 30, 2008
1994UL 510-1994 UL Standard for Safety Polyvinyl Chloride@ Polyethylene@ and Rubber Insulating Tape (Seventh Edition; Reprint with Revisions Through and Including August 03@ 1994)