This International Standard applies to cold-reduced carbon steel sheet of commercial and drawing
qualities coated in coil form by electro-deposition of tin. The product is commonly known as electrolytic tincoated
sheet and is used where solderability is desired, appearance is important, or a degree of corrosion
resistance under specific conditions is advantageous and coating mass can be specified. The coating is
expressed as the total coating on both surfaces, in grams per square metre. The coating mass specified
should be compatible with the desired service life, thickness of the base metal and the forming requirements
involved. A designation system (Clause 4) includes the coating designation, coating condition and quality.
Electrolytic tin-coated sheet is normally produced in thicknesses from 0,50 mm to 0,85 mm and widths of 600 mm to 1 050 mm, in coils and cut lengths.
ISO 5950:2008 history
2012ISO 5950:2012 Electrolytic tin-coated cold-reduced carbon steel sheet of commercial and drawing qualities
2008ISO 5950:2008 Continuous electrolytic tin-coated cold-reduced carbon steel sheet of commercial and drawing qualities
2000ISO 5950:2000 Continuous electrolytic tin-coated cold-reduced carbon steel sheet of commercial and drawing qualities
1991ISO 5950:1991 Continous electrolytic tin-coated cold-reduced carbon steel sheet of commercial and drawing qualities
1979ISO 5950:1979 Continuous electrolytic tin-coated cold-reduced carbon steel sheet of commercial and drawing qualities