This European Standard sets out the objectives for drain and sewer systems outside buildings. It specifies the
functional requirements for achieving these objectives and the principles for strategic and policy activities
relating to planning, design, installation, operation, maintenance and rehabilitation.
It is applicable to drain and sewer systems, which operate essentially under gravity, from the point where
wastewater leaves a building, roof drainage system, or paved area, to the point where it is discharged into a
wastewater treatment plant or receiving water.
Drains and sewers below buildings are included provided that they do not form part of the drainage system for
the building.
BS EN 752:2008 Referenced Document
EN 1295-1 Structural design of buried pipelines under various conditions of loading - Part 1: General requirements*, 2019-04-01 Update
EN 1610 Construction and testing of drains and sewers*, 2015-09-01 Update
EN 1825-1 Grease separators - Part 1: Principles of design, performance and testing, marking and quality control
EN 1825-2 Grease separators - Part 2: Selection of nominal size, installation, operation and maintenance
EN 1990 Eurocode - Basis of structural and geotechnical design*, 2023-03-22 Update
EN 1991-1-1 Eurocode 1: Actions on structures - Part 1-1: General actions - Densities, self-weight and imposed loads for buildings
EN 1991-1-2 Eurocode 1 - Actions on structures – Part 1-2: Actions on structures exposed to fire*, 2024-03-20 Update
EN 1991-1-3 Eurocode 1 - Actions on structures - Part 1-3: General actions - Snow loads*, 2015-09-01 Update
EN 1991-1-5 Eurocode 1: Actions on structures - Part 1-5: General actions; Thermal actions*, 2024-04-19 Update
EN 1991-2 Eurocode 1 - Actions on structures - Part 2: Traffic loads on bridges and other civil engineering works*, 2023-11-22 Update
EN 1991-4 Eurocode 1 - Actions on structures - Part 4: Silos and tanks
EN 1992-1-1 Eurocode 2 - Design of concrete structures - Part 1-1: General rules and rules for buildings, bridges and civil engineering structures*, 2023-11-22 Update
EN 1992-1-2 Eurocode 2 - Design of concrete structures – Part 1-2: Structural fire design*, 2023-11-22 Update
EN 1992-3 Eurocode 2 - Design of concrete structures - Part 3: Liquid retaining and containment structures
EN 1994-1-1 Eurocode 4 - Design of composite steel and concrete structures - Part 1-1: General rules and rules for buildings*, 2024-04-19 Update
EN 1996-1-1 Eurocode 6 - Design of masonry structures - Part 1-1: General rules for reinforced and unreinforced masonry structures*, 2022-04-06 Update
EN 1997-1 Eurocode 7: Geotechnical design - Part 1: General rules*, 2013-11-01 Update
EN 1998-1 Eurocode 8: Design of structures for earthquake resistance - Part 1: General rules, seismic actions and rules for buildings*, 2013-02-01 Update
EN 1998-3 Eurocode 8: Design of structures for earthquake resistance - Part 3: Assessment and retrofitting of buildings*, 2013-08-01 Update
EN 1999-1 Eurocode 9 - Design of aluminium structures - Part 1-5: Shell structures*, 2023-03-22 Update
EN 476:1997 General Requirements for Components Used in Discharge Pipes, Drains and Sewers for Gravity Systems
EN 858-1 Separator systems for light liquids (e.g. oil and petrol) - Part 1: Principles of product design, performance and testing, marking and quality control
EN 858-2 Separator systems for light liquids (e.g. oil and petrol) - Part 2: Selection of nominal size, installation, operation and maintenance
BS EN 752:2008 history
0000 BS EN 752:2017(2022)
2022BS EN 752:2017 Drain and sewer systems outside buildings. Sewer system management
2008BS EN 752:2008 Drain and sewer systems outside buildings
1998BS EN 752-7:1998 Drain and sewer systems outside buildings - Maintenance and operations
1997BS EN 752-2:1997 Drain and sewer systems outside buildings - Performance requirements
1996BS EN 752-1:1996 Drain and sewer systems outside buildings - Generalities and definitions