GOST 11098-1975 PDF

Scope: This standard applies to staples with measurement limits up to 1000 mm, equipped with a reading device with division values of 0.001, 0.002 and 0.01

GOST 11098-1975 Referenced Document

GOST 13762-1986 Measuring means for linear and angular measurements. Marking, packing, transporting and storage*， 1986-04-18 Update
GOST 27.410-1987 Industrial product dependability. Inspection methods of reliability indices and plans of check tests on reliability*， 1987-04-18 Update
GOST 3882-1974 Sintered hard alloys. Types
GOST 577-1968 Clock-type dial indicators graduated in unit divisions of 0,01 mm. Specifications
GOST 8.001-1980 State system of ensuring the unity of measurements. Rules for conducting the state tests of measuring means*， 1980-04-18 Update
GOST 8.359-1979 State system for ensuring the uniformity of measurements. Gangs callipers with reading arrangement. Methods and means for verification*， 1979-04-18 Update
GOST 8.383-1980 State system for ensuring the uniformity of measurements. State tests of means for measurements. General statements*， 1980-04-18 Update
GOST 9.032-1974 Unified system corrosion and ageing protection. Coatings of lacguers and paints. Classification and designations
GOST 9.303-1984 Unified system of corrosion and ageing protection. Metallic and non-metallic inorganic coatings. General requirements for selection*， 1984-04-18 Update
GOST 9.306-1985 Unified system of corrosion and ageing protection. Metallic and non-metallic inorganic coatings. Symbols*， 1985-04-18 Update