IEC 60044-2:2003
Instrument transformers - Part 2: Inductive voltage transformers

Standard No.
IEC 60044-2:2003
Release Date
2003
Published By
International Electrotechnical Commission (IEC)
Status
Latest
IEC 60044-2:2003
Replace By
IEC 61869-3:2011
Scope
This part of IEC 60044 applies to new inductive voltage transformers for use with electrical measuring instruments and electrical protective devices at frequencies from 15 Hz to 100 Hz. Although this standard relates basically to transformers with separate windings, it is also applicable, where appropriate, to auto-transformers. This standard does not apply to trans-formers for use in laboratories. NOTE Requirements specific to three-phase voltage transformers are not included in this standard but, so far as they are relevant, the requirements in clauses 3 to 11 apply to these transformers and a few references to them are included in those clauses (e.g. see 2.1.4, 5.1.1, 5.2, and 11.2). Clause 13 covers the requirements and tests, in addition to those in clauses 3 to 12, that are necessary for single-phase inductive protective voltage transformers. The requirements of clause 13 apply particularly to transformers which are required to have sufficient accuracy to operate protective systems at voltages that occur under fault conditions.

IEC 60044-2:2003 history

IEC 60044-2:2003 Instrument transformers - Part 2: Inductive voltage transformers was changed to IEC 61869-3:2011 Instrument transformers - Part 3: Additional requirements for inductive voltage transformers.

Instrument transformers - Part 2: Inductive voltage transformers



Copyright ©2024 All Rights Reserved