DIN EN ISO 20182:2008
Refractory test-piece preparation - Gunning refractory panels by the pneumatic-nozzle mixing type guns (ISO 20182:2008); English version of DIN EN ISO 20182:2008-04

Standard No.

DIN EN ISO 20182:2008

Release Date

2008

Published By

German Institute for Standardization

Status

Be replaced

Replace By

DIN EN ISO 20182:2008-04

Latest

DIN EN ISO 20182:2024-02

Replace

DIN EN ISO 20182:2006

Scope

This International Standard describes the procedure for the preparation of test panels from refractory materials by gunning through pneumatic-nozzle mixing type guns at ambient temperatures. NOTE The values obtained from test pieces cut from the panel prepared using this method might not correspond with those obtained from test pieces of the same material prepared at a gunning installation site. This International Standard does not apply to plastic gunning mixes, and might not apply to those mixes that contain aggregates that are susceptible to hydration. It also does not apply to shotcrete type mixes.

DIN EN ISO 20182:2008 Referenced Document

• ISO 836 Terminology for refractories
• ISO 8656-1 Refractory products; sampling of raw materials and unshaped products; part 1: sampling scheme

DIN EN ISO 20182:2008 history

• 2024 DIN EN ISO 20182:2024-02 Refractory test-piece preparation - Gunning refractory panels by the pneumatic-nozzle mixing type guns (ISO/DIS 20182:2023); German and English version prEN ISO 20182:2023 / Note: Date of issue 2024-01-05*Intended as replacement for DIN EN ISO 20182 (2...
• 2008 DIN EN ISO 20182:2008-04 Refractory test-piece preparation - Gunning refractory panels by the pneumatic-nozzle mixing type guns (ISO 20182:2008); German version EN ISO 20182:2008
• 2008 DIN EN ISO 20182:2008 Refractory test-piece preparation - Gunning refractory panels by the pneumatic-nozzle mixing type guns (ISO 20182:2008); English version of DIN EN ISO 20182:2008-04
• 0000 DIN EN ISO 20182:2006