ASA S2.8-2007
Technical Information Used for Resilient Mounting Applications Incorporates Erratum 2007

Standard No.
ASA S2.8-2007
Release Date
2007
Published By
Acoustical Society of America (ASA)
Latest
ASA S2.8-2007
Replace
ANSI S2.8-1972
Scope
This American National Standard establishes the requirements to promote an appropriate exchange of information regarding the application and selection of isolation for the reduction of vibrations generated by equipment and machines. Therefore, use of this standard can improve communication among engineers, manufacturers and end-users concerned with vibration isolation. It is beyond the scope of this standard to present characteristics of resilient mountings. Rather, it is intended to outline, in standardized form, what data and preliminary technical information should be presented to enable the experienced designer to apply resilient mountings correctly.

ASA S2.8-2007 history

  • 2007 ASA S2.8-2007 Technical Information Used for Resilient Mounting Applications Incorporates Erratum 2007
  • 1972 ANSI S2.8-1972 Guide for Describing the Characteristics of Resilient Mountings

ASA S2.8-2007 Technical Information Used for Resilient Mounting Applications Incorporates Erratum 2007 has been changed from ANSI S2.8-1972 Guide for Describing the Characteristics of Resilient Mountings.

ASA S2.8-2007 -All Parts

ASA S2.1-2009 American National Standard Mechanical vibration, shock and condition monitoring - Vocabulary ASA S2.13 PART 1-1996 Mechanical Vibration of Non-Reciprocating Machines - Measurements on Rotating Shafts and Evaluation - Part 1: General Guidelines R(2001) ASA S2.16-1997 Vibratory Noise Measurements and Acceptance Criteria of Shipboard Equipment ASA S2.17-1980 Techniques of Machinery Vibration Measurement ASA 24-1980 ASA S2.19-1999(R2004) Mechanical Vibration - Balance Quality Requirements of Rigid Rotors, Part 1: Determination of Possible Unbalance, Including Marine Applications ASA S2.2-1959 American National Standard Methods for the Calibration of Shock and Vibration Pickups ASA S2.20-1983 Estimating Air Blast Characteristics for Single Point Explosions in Air, with a Guide to Evaluation of Atmospheric Propagation and Effects ASA 20-1983 ASA S2.21-1998 Method for Preparation of a Standard Material for Dynamic Mechanical Measurements ASA S2.22-1998 Resonance Method for Measuring the Dynamic Mechanical Properties of Viscoelastic Materials ASA S2.23-1998 Single Cantilever Beam Method for Measuring the Dynamic Mechanical Properties of Viscoelastic Materials ASA S2.24-2001 Graphical Presentation of the Complex Modulus of Viscoelastic Materials ASA S2.25-2004 Guide for the Measurement, Reporting, and Evaluation of Hull and Superstructure Vibration in Ships ASA S2.26-2001 Vibration Testing Requirements and Acceptance Criteria for Shipboard Equipment ASA S2.27-2002 Guidelines for the Measurement and Evaluation of Vibration of Ship Propulsion Machinery ASA S2.28-2009 American National Standard Guide for the Measurement and Evaluation of Broadband Vibration of Surface Ship Auxiliary Rotating Machinery ASA S2.29-2003 Guide for the Measurement and Evaluation of Vibration of Machine Shafts on Shipboard Machinery ASA S2.31-1979 Methods for the Experimental Determination of Mechanical Mobility. Part I: Basic Definitions and Transducers ASA S2.32-1982 Methods for the Experimental Determination of Mechanical Mobility. Part II: Measurements Using Single-Point Translational Excitation ASA S2.34-1984 Guide to the Experimental Determination of Rotational Mobility Properties and the Complete Mobility Matrix ASA 34-1984 ASA S2.38-1982 Field Balancing Equipment - Description and Evaluation ASA 44-1982 R(2001) ASA S2.4-1976 American National Standard Method for Specifying the Characteristics of Auxiliary Analog Equipment for Shock and Vibration Measurements ASA S2.40-1984 Mechanical Vibration of Rotating and Reciprocating Machinery - Requirements for Measuring Vibration Severity ASA 50-1984 R(2001) ASA S2.41-1985 Mechanical Vibration of Large Rotating Machines with Speed Range from 10 to 200 Rev/s - Measurement and Evaluation of Vibration Severity In Situ ASA 56-1985 R(2001) ASA S2.42-1982 Procedures for Balancing Flexible Rotors ASA 46-1982 ASA S2.43-1984 Criteria for Evaluating Flexible Rotor Balance ASA 54-1984 ASA S2.45-1983 Electrodynamic Test Equipment for Generating Vibration - Methods of Describing Equipment Characteristics ASA 51-1983 R(2001) ASA S2.46-1989 Characteristics to be Specified for Seismic Transducers ASA 82-1989 ASA S2.47-1990 Vibration of Buildings - Guidelines for the Measurement of Vibrations and Evaluation of Their Effects on Buildings ASA 95-1990 R(2001) ASA S2.48-1993 Servo-Hydraulic Test Equipment for Generating Vibration - Methods of Describing Characteristics ASA 108 1993 ASA S2.58-1983 Auxiliary Tables for Vibration Generators - Methods of Describing Equipment Characteristics ASA 52-1983 R(2001) ASA S2.60-1987 Balancing Machines - Enclosures and Other Safety Measures ASA 68-1987 ASA S2.61-1989 Guide to the Mechanical Mounting of Accelerometers ASA 78-1989 ASA S2.62-2009 American National Standard Shock Test Requirements for Equipment in a Rugged Shock Environment (Includes Access to Additional Content) ASA S2.7-1982 Balancing Terminology ASA S2.70-2006 AMERICAN NATIONAL STANDARD Guide for the Measurement and Evaluation of Human Exposure to Vibration Transmitted to the Hand ASA S2.71 -1983 Guidelines for Evaluating Human Exposure to Vibration in Buildings Accredited Standards Committee S2 Mechanical Vibration and Shock Standards Secretariat American Acoustical Society 35 Pinelawn Road, Suite 114 E Melville, NY 11747-3177 ANSI S2.71-1983 ASA S2.71-1983 American National Standard Guide to the Evaluation of Human Exposure to Vibration in Buildings ASA S2.72 PART 1 AMD 1-2010 American National Standard Mechanical vibration and shock - Evaluation of human exposure to whole-body vibration - Part 1: General requirements, AMENDMENT 1 ASA S2.72 PART 1-2002 Mechanical vibration and shock ?Evaluation of human exposure to whole-body vibration ?Part 1: General requirements [Replaced: ASA S3.18, ASA S3.18] ASA S2.72 PART 4 AMD 1-2010 American National Standard Mechanical vibration and shock - Evaluation of human exposure to whole-body vibration - Part 4: Guidelines for the evaluation of the effects of vibration and rotational motion on passenger and crew comfort in fixed-guideway tran ASA S2.72 PART 4-2003 Mechanical Vibration and Shock ?Evaluation of Human Exposure to Whole Body Vibration ?Part 4: Guidelines for the Evaluation of the Effects of Vibration and Rotational Motion on Passenger and Crew Comfort in Fixed-Guideway Transport Systems Formerly ANSI ASA S2.73-2014 American National Standard Mechanical Vibration and Shock - Hand-arm Vibration - Measurement and Evaluation of the Vibration Transmissibility of Gloves at the Palm of the Hand (a nationally adopted international standard) ASA S2.9-2008 Parameters for Specifying Damping Properties of Materials and System Damping


Copyright ©2024 All Rights Reserved