DIN EN 14879-4:2008
Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 4: Linings on metallic components; English version of DIN EN 14879-4:2008-01

Standard No.

DIN EN 14879-4:2008

Release Date

2008

Published By

German Institute for Standardization

Latest

DIN EN 14879-4:2008

Replace

DIN 28055-1:2002 DIN 28055-2:2002 DIN EN 14879-4:2005

Scope

This document describes the requirements for and methods of testing of organic linings which are applied to metallic process engineering equipment that will come in contact with chemical substances The requirements specified here may be used for the purposes of quality control (e.g. as agreed between the contract partners. The standard applies to linings which serve one or more of the following purposes: -- to protect the component from adverse effects of aggressive substances; -- to protect waters (e.g. ground water) from harmful substances; -- to protect the charge from becoming contaminated by components released from the substrate material; -- to achieve a particular surface quality. This standard applies to vessels, apparatus, piping parts and other components for process plants made of metallic substrate materials which are in contact with media and are provided with a surface protection made of a) prefabricated, natural or synthetic rubber based sheeting (subsequently named rubber lining), to be applied in the workshop or on site; b) prefabricated, phenol formaldehyde or epoxy resin based sheeting (subsequently named duroplastic lin- ing), to be applied in the workshop only; c) prefabricated, thermoplastic products (e.g. foils, sheeting, plates, pipes) (subsequently named thermo- plastic lining), to be applied in the workshop or on site. The standard specifies the requirements, acceptance inspection, packaging, transport, storage and installation of organic linings for metallic materials. The tests described in this standard are intended for verification of the suitability of sheeting used for linings and for acceptance inspection to be carried out on the products during or after application of the lining or as part of routine inspections to determine any changes effected in the lining during service.

DIN EN 14879-4:2008 Referenced Document

• EN 12814 Testing of welded joints of thermoplastics semi-finished products - Part 8: Requirements*， 2020-12-31 Update
• EN 14728 Imperfections in thermoplastic welds - Classification*， 2019-02-01 Update
• EN 14879-1:2005 Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 1: Terminology, design and preparation of substrate
• EN 228 Automotive fuels - Unleaded petrol - Requirements and test methods*， 2024-04-18 Update
• EN 59 Glass reinforced plastics - Determination of indentation hardness by means of a Barcol hardness tester*， 2016-02-01 Update
• EN 590 Automotive fuels - Diesel - Requirements and test methods*， 2014-03-01 Update
• EN ISO 12944-4 Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 4: Types of surface and surface preparation*， 2017-12-01 Update
• EN ISO 2039-1 Plastics - Determination of hardness - Part 1: Ball indentation method (ISO 2039-1:2001)
• EN ISO 291 Plastics - Standard atmospheres for conditioning and testing (ISO 291:2008)*， 2008-05-01 Update
• EN ISO 4624:2003 Paints and varnishes Pull-off test for adhesion ISO 4624: 2002; Supersedes EN 24624: 1992
• EN ISO 8503-1 Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 1: Specifications and definitions for ISO surface profile comparators for the assessment of abra*， 2012-02-01 Update
• EN ISO 8503-2 Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 2: Method for the grading of surface profile of abrasive blast-cleaned steel - Comparator proced*， 2012-02-01 Update
• EN ISO 868 Plastics and ebonite - Determination of indentation hardness by means of a durometer (Shore hardness) (ISO 868:2003)
• IEC 60167 Methods of test for the determination of the insulation resistance of solid insulating materials
• ISO 1817 Rubber, vulcanized or thermoplastic*， 2024-02-01 Update
• ISO 813 Rubber, vulcanized or thermoplastic — Determination of adhesion to a rigid substrate — 90 degree peel method*， 2019-07-17 Update

DIN EN 14879-4:2008 history

• 2008 DIN EN 14879-4:2008 Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 4: Linings on metallic components; English version of DIN EN 14879-4:2008-01
• 0000 DIN EN 14879-4:2005
• 2002 DIN 28055-2:2002 Chemical apparatus - Surface protection with organic linings for application to metallic components - Part 2: Proof of suitability and testing