SAE AMS6330G-2007
Steel Bars, Forgings, and Tubing 0.65Cr - 1.25Ni (0.33 - 0.38C)
- Standard No.
- SAE AMS6330G-2007
- Release Date
- 2007
- Published By
- Society of Automotive Engineers (SAE)
- Status
- Replace By
- SAE AMS6330H-2012
- Latest
- SAE AMS6330K-2022
- Scope
- This specification covers an aircraft-quality, low-alloy steel in the form of bars, forgings, mechanical tubing, and forging stock. These products have been used typically for parts 0.750 inch (19.05 mm) and under in nominal section thickness at time of heat treatment requiring a through-hardening steel capable of developing minimum tensile strength of 180 ksi (1241 MPa) at the section center when properly hardened and tempered and for parts of greater section thickness but requiring proportionately lower strength, but usage is not limited to such applications.
SAE AMS6330G-2007 history
- 2022 SAE AMS6330K-2022 Steel Bars, Forgings, Mechanical Tubing and Forging Stock 0.65Cr - 1.25Ni (0.33 - 0.38C)
- 2017 SAE AMS6330J-2017 Steel Bars@ Forgings@ and Tubing 0.65Cr - 1.25Ni (0.33 - 0.38C) (UNS K22033)
- 2012 SAE AMS6330H-2012 Steel Bars, Forgings, and Tubing 0.65Cr 1.25Ni (0.33-0.38C)
- 2007 SAE AMS6330G-2007 Steel Bars, Forgings, and Tubing 0.65Cr - 1.25Ni (0.33 - 0.38C)
- 2006 SAE AMS6330F-2006 Steel Bars, Forgings, and Tubing 0.65Cr - 1.25Ni (0.33 - 0.38C)
- 2001 SAE AMS6330F-2001 Steel Bars, Forgings, and Tubing 0.65Cr 1.25Ni (0.33-0.38C)
- 1994 SAE AMS6330E-1994 STEEL BARS, FORGINGS, AND TUBING 0.65Cr - 1.25Ni (0.33 - 0.38C)
- 1990 SAE AMS6330E-1990 Steel Bars@ Forgings@ and Tubing 0.65Cr - 1.25Ni (0.33 - 0.38C)
- 1984 SAE AMS6330D-1984 STEEL BARS@ FORGINGS@ AND TUBING 1.25Cr - 0.65Ni (0.33 - 0.38C)
- 1978 SAE AMS6330C-1978 STEEL BARS@ FORGINGS@ AND TUBING 1.25Cr - 0.65Ni (0.33 - 0.38C)
- 1971 SAE AMS6330B-1971 STEEL BARS@ FORGINGS@ AND TUBING 1.25Cr - 0.65Ni (0.33 - 0.38C)
- 1942 SAE AMS6330A-1942 STEEL Nickel Chromium
- 1939 SAE AMS6330-1939 STEEL Nickel Chromium
