ISO 10304-1:2007 PDF

Scope: This part of ISO 10304 specifies a method for the determination of dissolved bromide, chloride, fluoride, nitrate, nitrite, orthophosphate and sulfate in water, e.g. drinking water, ground water, surface water, waste water, leachates and marine water by liquid chromatography of ions. The lower limit of application is W 0,05 mg/l for bromide and for nitrite, and W 0,1 mg/l for chloride, fluoride, nitrate, orthophosphate, and sulfate. The lower limit of application depends on the matrix and the interferences encountered. The working range may be expanded to lower concentrations (e.g. W 0,01 mg/l) if an appropriate pre-treatment of the sample (e.g. conditions for trace analyses, pre-concentration technique) is applied, and/or if an ultraviolet (UV) detector (for bromide, nitrate and nitrite) is used.

ISO 10304-1:2007 Referenced Document

ISO 3696 Water for analytical laboratory use; Specification and test methods
ISO 5667-3 Water quality*， 2024-02-01 Update
ISO 8466-1 Water quality — Calibration and evaluation of analytical methods — Part 1: Linear calibration function*， 2021-11-17 Update
ISO 8466-2 Water quality - Calibration and evaluation of analytical methods and estimation of performance characteristics - Part 2: Calibration strategy for non-linear second-order calibration functions

2010 ISO 10304-1:2007/Cor 1:2010 Water quality - Determination of dissolved anions by liquid chromatography of ions - Part 1: Determination of bromide, chloride, fluoride, nitrate, nitrite, phosphate and sulfate; Technical Corrigendum 1
2007 ISO 10304-1:2007 Water quality - Determination of dissolved anions by liquid chromatography of ions - Part 1: Determination of bromide, chloride, fluoride, nitrate, nitrite, phosphate and sulfate
1992 ISO 10304-1:1992 Water quality; determination of dissolved fluoride, chloride, nitrite, orthophosphate, bromide, nitrate and sulfate ions, using liquid chromatography of ions; part 1: method for water with low contamination