This part of IEC 62317 specifies the standards and existing projects dealing with dimensions
of ferrite cores.
It is intended that this standard will include ferrite cores which are widely used and referenced
in industry, either because they are included in national standards, or because they are seen
to have broad-based use in industry. Where applicable, it is intended that the existing
industrial name for each standard part should appear with the part within this series.
It is intended that this standard will exclude ferrite cores which are specialty cores with limited
use. Also, special cores which are only marginal variations upon standard cores are excluded.
Examples:
E24/25 (USA) and E24,5 (Metric) are two similar parts, yet they are included
separately in this series because they are national standards, widely used.
E-187 (USA) and FEE19A (Japan) are two similar parts, yet they are included
separately in this series because they are national standards, widely used.
EP5 has small dimensional differences when comparing different manufacturers, yet
only one EP5 is shown in this series, because they are only minor variations on the
single basic part.
A ferrite core produced by only one or two suppliers may generally be considered a
specialty part, and not suitable as a standard core within this series. A ferrite core
produced by three or more competing manufacturers may generally be considered to
be a candidate to be included in this series.
IEC publishes electrical standards for families of ferrite cores, as well as this series of
dimensional standards for families of ferrite cores. Modifications to the ferrite cores listed in
one type of standard should be reflected in the other type.
BS EN 62317-1:2007 Referenced Document
IEC 60133 Dimensions of Pot-Cores Made of Magnetic Oxides and Associated Parts (Edition 4.0)
IEC 60647 Dimensions for magnetic oxide cores intended for use in power supplies (EC-cores)
IEC 61185 Ferrite cores (ETS-cores) intended for use in power supply applications - Dimensions
IEC 61247 PM-cores made of magnetic oxides and associated parts - Dimensions
IEC 61596 Magnetic oxide EP-cores and associated parts for use in inductors and transformers - Dimensions
IEC 62317-4 Corrigendum 1 - Ferrite cores - Dimensions - Part 4: RM-cores and associated parts*, 2016-07-15 Update
IEC 62317-7 Ferrite cores - Dimensions - Part 7: EER-cores
IEC 62317-8 Ferrite cores - Dimensions - Part 8: E-cores