DIN ISO 11040-4:2007
Prefilled syringes - Part 4: Glass barrels for injectables (ISO 11040-4:2007); Text in German and English

Standard No.

DIN ISO 11040-4:2007

Release Date

2007

Published By

German Institute for Standardization

Status

Be replaced

Replace By

DIN ISO 11040-4:2017

Latest

DIN ISO 11040-4:2023-05

Replace

DIN ISO 11040-4:1996 DIN ISO 11040-4:2006

Scope

This part of ISO 11040 applies to tubing-glass barrels (single-chamber design) for injection preparations and specifies materials, inmensions and performance details. Glass barrels from tubing galss in accordance with this part of ISO 11040 are right use only. In conjunction with the right sealing components, they offer a safe system for parenteral use.

DIN ISO 11040-4:2007 Referenced Document

• ISO 4802-1:1988 Glassware; hydrolytic resistance of the interior surfaces of glass containers; part 1: determination by titration method and classification
• ISO 4802-2:1988 Glassware; hydrolytic resistance of the interior surfaces of glass containers; part 2: determination by flame spectrometry and classification
• ISO 594-1 Conical fittings with a 6 % (Luer) taper for syringes, needles and certain other medical equipment; Part 1 : General requirements
• ISO 594-2 Conical fittings with 6% (Luer) taper for syringes, needles and certain other medical equipment - Part 2: Lock fittings
• ISO 720:1985 Glass; Hydrolytic resistance of glass grains at 121 degrees C; Method of test and classification

DIN ISO 11040-4:2007 history

• 2023 DIN ISO 11040-4:2023-05 Prefilled syringes - Part 4: Glass barrels for injectables and sterilized subassembled syringes ready for filling (ISO/DIS 11040-4:2023); Text in German and English / Note: Date of issue 2023-03-31*Intended as replacement for DIN ISO 11040-4 (2017-07).
• 2017 DIN ISO 11040-4:2017-07 Prefilled syringes - Part 4: Glass barrels for injectables and sterilized subassembled syringes ready for filling (ISO 11040-4:2015)
• 1970 DIN ISO 11040-4 E:2017-02 Prefilled syringes - Part 4: Glass barrels for injectables and sterilized subassembled syringes ready for filling
• 2017 DIN ISO 11040-4:2017 Prefilled syringes - Part 4: Glass barrels for injectables and sterilized subassembled syringes ready for filling (ISO 11040-4:2015)
• 2007 DIN ISO 11040-4:2007 Prefilled syringes - Part 4: Glass barrels for injectables (ISO 11040-4:2007); Text in German and English
• 0000 DIN ISO 11040-4:2006
• 0000 DIN ISO 11040-4:1996