SAE AMS2375D-2007
Control of Forgings Requiring First Article Approval

Standard No.

SAE AMS2375D-2007

Release Date

2007

Published By

Society of Automotive Engineers (SAE)

Status

Be replaced

Replace By

SAE AMS2375D-2012

Latest

SAE AMS2375F-2022

Scope

This specification covers procedures for obtaining first-article (preproduction) approval of forgings and the controls to be exercised in producing subsequent production forgings. This procedure has been used typically for forgings which require preproduction approval and where assurance is required that production lots are of essentially the same metallurgical quality and are produced by the same basic procedures as the forging originally qualified.

SAE AMS2375D-2007 Referenced Document

• ASTM E3-01 Standard Practice for Preparation of Metallographic Specimens

SAE AMS2375D-2007 history

• 2022 SAE AMS2375F-2022 Control of Forgings Requiring First Article Approval
• 2017 SAE AMS2375E-2017 Control of Forgings Requiring First Article Approval
• 2012 SAE AMS2375D-2012 Control of Forgings Requiring First Article Approval
• 2007 SAE AMS2375D-2007 Control of Forgings Requiring First Article Approval
• 2001 SAE AMS2375C-2001 Control of Forgings Requiring First Article Approval
• 1996 SAE AMS2375C-1996 Control of Forgings Requiring First Article Approval
• 1984 SAE AMS2375B-1984 CONTROL OF FORGINGS REQUIRING FIRST ARTICLE APPROVAL
• 1978 SAE AMS2375A-1978 CONTROL OF FORGINGS REQUIRING FIRST ARTICLE APPROVAL
• 1969 SAE AMS2375-1969 APPROVAL AND CONTROL OF CRITICAL FORGINGS