ISO 8568:2007
Mechanical shock - Testing machines - Characteristics and performance

Standard No.

ISO 8568:2007

Release Date

2007

Published By

International Organization for Standardization (ISO)

Latest

ISO 8568:2007

Scope

This International Standard specifies performance parameters and methods of inspection of mechanical shock-testing machines and gives guidelines for describing their characteristics. It is intended to ensure that the potential user of a particular shock-testing machine is provided with an adequate description of the characteristics of the machine, and also to give guidance on the selection of such machines. This International Standard is applicable to the shock-testing machines that are used for demonstrating or evaluating the effect of shock conditions representative of the service environment in accordance with the relevant part of IEC 60068 and also for diagnostic testing. The purpose of the shock test is to reveal mechanical weakness and/or degradation in specified performance. It can also be used to determine the structural integrity of a test specimen or as a means of quality control. Machines used for simulation of earthquakes, sonic booms, explosions and implosions, bursting tests, metalworking, forming, etc. are not covered in this International Standard. Several techniques for generating the desired shock motion are discussed. Both simple-pulse and complex transients can be produced. The simulation of transients can be achieved by control of the test with a specified shock-response spectrum. NOTE 1 Annex A gives a description of pulse-shaping devices. Annex B defines methods of application of the shock response spectra. Annex C considers a method of evaluating the possibility of using a vibration generator for producing a shock pulse. Annexes D and E deal with the methods of measurement of some characteristics in inspection methods (or procedures) of shock-testing machines. NOTE 2 Characteristics of vibration-generating equipment are covered in ISO 5344, ISO 6070 and ISO 8626.

ISO 8568:2007 Referenced Document

• IEC 60068-1:1988 Environmental testing. Part 1: General and guidance
• IEC 60068-2-27:1987 Environmental testing. Part 2: Tests. Test Ea and guidance: Shock
• ISO 15261 Vibration and shock generating systems — Vocabulary AMENDMENT 1
• ISO 2041:1990 Vibration and shock; vocabulary
• ISO 5348 Mechanical vibration and shock - Mechanical mounting of accelerometers*， 2020-12-31 Update

ISO 8568:2007 history

• 2007 ISO 8568:2007 Mechanical shock - Testing machines - Characteristics and performance
• 1989 ISO 8568:1989 Mechanical shock; testing machines; characteristics and performance