ISO 2285:2007
Rubber, vulcanized or thermoplastic - Determination of tension set under constant elongation, and of tension set, elongation and creep under constant tensile load

Standard No.

ISO 2285:2007

Release Date

2007

Published By

International Organization for Standardization (ISO)

Status

Withdraw

Replace By

ISO 2285:2013

Latest

ISO 2285:2019

Scope

This International Standard specifies a number of methods of determining the dimensional changes in test pieces of vulcanized or thermoplastic rubber during and after tensile loading for relatively short periods under constant elongation or constant loading. The constant-elongation test is intended to measure the ability of rubbers to retain their elastic properties after extension,at a standard laboratory temperature, to a specifies strain which is remained for a specified time at the same or at a specified higher temperature and then released at the test temperature or at the standard laboratory temperature. The constant-load test specifies a method for the determination of elongation,creep and tension set of rubbers subjected to a constant load at standard laboratory temperature. The test methods are intended to measure the elastic properties of rubber in the hardness range 20 IRHD to 94 IRHD. The creep measurement is not recommended for product design or the evaluation of low-creep materials.For these,reference should be made to ISO 8013.No agreement between the results of this test or those of ISO 8013 should be inferred.

ISO 2285:2007 history

• 2019 ISO 2285:2019 Rubber, vulcanized or thermoplastic — Determination of tension set under constant elongation, and of tension set, elongation and creep under constant tensile load
• 2013 ISO 2285:2013 Rubber, vulcanized or thermoplastic - Determination of tension set under constant elongation, and of tension set, elongation and creep under constant tensile load
• 2007 ISO 2285:2007 Rubber, vulcanized or thermoplastic - Determination of tension set under constant elongation, and of tension set, elongation and creep under constant tensile load
• 2001 ISO 2285:2001 Rubber, vulcanized or thermoplastic - Determination of tension set under constant elongation, and of tension set, elongation and creep under constant tensile load
• 1997 ISO 2285:1997 Rubber, vulcanized or thermoplastic - Determination of tension set at normal and high temperatures
• 1988 ISO 2285:1988 Rubber, vulcanized or thermoplastic; determination of tension set at normal and high temperatures
• 1981 ISO 2285:1981 Rubber, vulcanized — Determination of tension set at normal and high temperatures
• 1975 ISO 2285:1975 Title missing - Legacy paper document