DIN EN ISO 7823-3:2007
Plastics - Poly(methyl methacrylate) sheets - Types, dimensions and characteristics - Part 3: Continuous cast sheets (ISO 7823-3:2007); English version of DIN EN ISO 7823-3:2007-08

Standard No.

DIN EN ISO 7823-3:2007

Release Date

2007

Published By

German Institute for Standardization

Status

Be replaced

Replace By

DIN EN ISO 7823-3:2021

Latest

DIN EN ISO 7823-3:2021

DIN EN ISO 7823-3 E:2021-04

Replace

DIN EN ISO 7823-3:2004 DIN EN ISO 7823-3:2006

Scope

This part of ISO 7823 specifies requirements for non-modified flat poly(methyl methacrylate) (PMMA) continuous cast sheets for general-purpose use. The sheets may be colourless or coloured, and may be transparent, translucent or opaque. The thickness range of the sheets covered by this part of ISO 7823 is 1 mm to 10 mm.

DIN EN ISO 7823-3:2007 Referenced Document

• ISO 11359-2 Plastics — Thermomechanical analysis (TMA) — Part 2: Determination of coefficient of linear thermal expansion and glass transition temperature*， 2021-11-12 Update
• ISO 1183-1:2004 Plastics - Methods for determining the density of non-cellular plastics - Part 1: Immersion method, liquid pyknometer method and titration method
• ISO 1183-2 Plastics — Methods for determining the density of non-cellular plastics — Part 2: Density gradient column method*， 2019-02-28 Update
• ISO 13468-1 Plastics — Determination of the total luminous transmittance of transparent materials — Part 1: Single-beam instrument*， 2019-06-05 Update
• ISO 13468-2 Plastics — Determination of the total luminous transmittance of transparent materials — Part 2: Double-beam instrument*， 2021-06-04 Update
• ISO 14782 Plastics — Determination of haze for transparent materials*， 2021-10-14 Update
• ISO 178 Surface chemical analysis — Secondary ion mass spectrometry — Linearity of intensity scale in single ion counting time-of-flight mass analysers*， 2019-04-01 Update
• ISO 179-1 Plastics. Determination of Charpy impact properties - Non-instrumented impact test*， 2023-06-07 Update
• ISO 2039-2 Plastics; Determination of hardness; Part 2 : Rockwell hardness
• ISO 2818 Plastics — Preparation of test specimens by machining*， 2018-12-13 Update
• ISO 2859-1 Sampling procedures for inspection by attributes - Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection; Technical Corrigendum 1
• ISO 291 Plastics - Standard atmospheres for conditioning and testing*， 2008-05-01 Update
• ISO 306:2004 Plastics - Thermoplastic materials - Determination of Vicat softening temperature (VST)
• ISO 4582 Plastics — Determination of changes in colour and variations in properties after exposure to glass-filtered solar radiation, natural weathering or laboratory radiation sources*， 2017-08-17 Update
• ISO 4892-2:2006 Plastics - Methods of exposure to laboratory light sources - Part 2: Xenon-arc lamps
• ISO 4892-4 Plastics.Methods of exposure to laboratory light sources.Part 4: Open-flame carbon-arc lamps*， 2013-07-15 Update
• ISO 489:1999 Plastics - Determination of refractive index
• ISO 527-2 Plastics - Determination of tensile properties - Part 2: Test conditions for moulding and extrusion plastics*， 2012-02-01 Update
• ISO 62:1999 Plastics - Determination of water absorption
• ISO 75-2:2004 Plastics - Determination of temperature of deflection under load - Part 2: Plastics and ebonite
• ISO 877 Plastics - Methods of exposure to direct weathering, to weathering using glass-filtered daylight, and to intensified weathering by daylight using Fresnel mirrors

DIN EN ISO 7823-3:2007 history

• 2021 DIN EN ISO 7823-3:2021 Plastics - Poly(methyl methacrylate) sheets - Types, dimensions and characteristics - Part 3: Continuous cast sheets (ISO 7823-3:2021); German version EN ISO 7823-3:2021
• 2007 DIN EN ISO 7823-3:2007 Plastics - Poly(methyl methacrylate) sheets - Types, dimensions and characteristics - Part 3: Continuous cast sheets (ISO 7823-3:2007); English version of DIN EN ISO 7823-3:2007-08
• 0000 DIN EN ISO 7823-3:2006
• 0000 DIN EN ISO 7823-3:2004