YY 0600.3-2007
Lung ventilators for medical use-Particular requirements for basic safety and essential performance-Part 3:Emergency and transport ventilators (English Version)

Standard No.

YY 0600.3-2007

Language

Chinese, Available in English version

Release Date

2007

Published By

Professional Standard - Medicine

Status

Withdraw

Latest

YY 0600.3-2007

Replace By

YY 9706.284-2023

Scope

Note: See the instructions in Appendix AA. This part is a special standard based on GB 9706.1 "Medical Electrical Equipment Part 1: General Safety Requirements". As stated in 1.3 of GB 9706.1, the requirements of this section are more effective than the relevant requirements of GB 9706.1. If a provision of GB 9706.1 is stated to be applicable in this section, it means that the provision is applicable only when the proposed requirements are relevant to the emergency and transport ventilator under consideration. This part has common requirements with GB 9706.28 "Medical Electrical Equipment Part 2: Special Requirements for Ventilator Safety and Therapeutic Ventilators". The scope and purpose given in Chapter 1 of GB 9706.1-2007 are applicable, but 1.1 should be modified as follows: This part specifies the requirements for portable ventilators used in emergencies and when transporting patients. Portable ventilators for first aid and transport (hereinafter referred to as "ventilators") are often installed on ambulances or other rescue vehicles, but are also often used outside the vehicle and must be carried by the operator or other personnel. These devices are often used outside the hospital or at home by personnel with varying degrees of training. This section also applies to ventilators that are fixedly installed on ambulances or aircraft. This section does not apply to artificial respirators (such as artificial resuscitators).

YY 0600.3-2007 Referenced Document

• GB 7144-1999 Coloured cylinder mark for gases
• GB 9706.1 Medical electrical equipment—Part 1: General requirements for basic safety and essential performance*， 2020-04-09 Update
• GB 9706.28-2006 Medical electrical equipment.Part 2:Particular requirements for the safety of lung ventilators.Critical care ventilators
• GB/T 2423.10-1995 Environmental testing for electric and electronic products. Part 2: Test methods. Test Fc and guidance: Vibration (Sinusoidal)
• GB/T 2423.6-1995 Environmental testing for electric and electronic products. Part 2: Test methods. Test Eb and guidance: Bump
• GB/T 2423.8-1995 Environmental testing for electric and electronic products. Parts 2: Test methods. Test Ed: Free fall
• GB/T 4999-2003 Anaesthetic and respiratory equipment vocabulary
• GB/T 5332-1985 Method of test for ignition temperature of flammable liquids and gases
• ISO 5356-2:1987 Anaesthetic and respiratory equipment; Conical connectors; Part 2 : Screw-threaded weight-bearing connectors
• ISO 5359:1989 Low-pressure flexible connecting assemblies (hose assemblies) for use with medical gas systems
• ISO 5362:1986 Anaesthetic reservoir bags
• ISO 9170:1990 Terminal units for use in medical gas pipeline systems
• YY 0461-2003 Breathing tubes intended for use with aneasthetic apparatus and ventilators
• YY 0505-2005 Medical electrical equipment - Part 1-2: General requirements for safety - Collateral standard: Electromagnetic compatibility - Requirements and tests
• YY 0574.1-2005 Anaesthesia and respiratory care alarm signals - Part 1: Visual alarm signals
• YY 0574.2-2005 Anaesthesia and respiratory care alarm signals - Part 2: Auditory alarm signal
• YY 1040.1-2003 Anaesthetic and respiratory equipment-Conical connectors-Part 1:Cones and sockets

YY 0600.3-2007 history

• 2007 YY 0600.3-2007 Lung ventilators for medical use-Particular requirements for basic safety and essential performance-Part 3:Emergency and transport ventilators

YY 0600.3-2007 Lung ventilators for medical use-Particular requirements for basic safety and essential performance-Part 3:Emergency and transport ventilators was changed to YY 9706.284-2023 Medical electrical equipment Part 2-84: Specific requirements for basic safety and essential performance of ventilators for use in emergency medical service environments.