BS EN 1337-7:2004
Structural bearings — Part 7: Spherical and cylindrical PTFE bearings
- Standard No.
- BS EN 1337-7:2004
- Release Date
- 2006
- Published By
- British Standards Institution (BSI)
- Status
- 2006-12
- Replace By
- BS EN 1337-7:2006
- Latest
- BS EN 1337-7:2006
- Replace
- BS 5400-9.2:1983 BS 5400-9.1:1983 BS EN 1337-7:2001
- Scope
- This European Standard deals with the requirements for the design and manufacture of spherical and cylindrical PTFE bearings. The requirements and properties of the curved sliding surfaces are included in EN 1337-2. Spherical and cylindrical bearings with an included angle 2 q > 60° and 2 q > 75° respectively are beyond the scope of this European Standard. (see Figure 6). For the purpose of controlling the degree of freedom the bearings may be combined with flat sliding elements and guides according to EN 1337-2:2004 and restraining rings as per 6.3.4. Cylindrical bearings are susceptible to unexpected moments about the transverse axis of the cylindrical surface. Additional limitation of application to be taken into consideration is given in clause 1 of EN 1337-2:2004.
BS EN 1337-7:2004 Referenced Document
- EN 1337-1:2000 Structural Bearings - Part 1: General Design Rules
- EN 1337-2:2004 Structural bearings - Part 2: Sliding elements
BS EN 1337-7:2004 history
- 2006 BS EN 1337-7:2006 Structural bearings - Spherical and cylindrical PTFE bearings
- 2002 BS EN 1990:2002+A1:2005 Eurocode - Basis of structural design
- 2006 BS EN 1337-7:2004 Structural bearings — Part 7: Spherical and cylindrical PTFE bearings
- 0000 BS EN 1337-7:2001
- 1978 BS 5400-2:1978 Steel, concrete and composite bridges. Specification for loads
