1 Scope
This part of IEC 60669 applies to manually operated general purpose switches, for a.c. only
with a rated voltage not exceeding 440 V and a rated current not exceeding 63 A, intended for
household and similar fixed electrical installations, either indoors or outdoors.
For switches provided with screwless terminals the rated current is limited to 16 A.
Switches covered by this standard are intended for the control in normal use of:
– a circuit for a tungsten filament lamp load; or
– a circuit for a fluorescent lamp load (including electronic ballast); or
– a circuit for a substantially resistive load with a power factor not less than 0,95; or
– a monophase circuit for motor load with a rated current up to 10 A and a power factor not
less than 0,6; or
– a combination of these.
NOTE 1 An extension of the scope to switches for rated voltages higher than 440 V is under consideration.
NOTE 2 An increase of the rated current of 10 A for motor load is under consideration.
NOTE 3 For the time being, switches with a rated current more than 10 A are considered as a 10 A current for
motor load switch.
The standard also applies to boxes for switches, with the exception of mounting boxes for flush
type switches.
NOTE 4 General requirements for boxes for flush-type switches are given in IEC 60670.
It also applies to switches such as:
– switches incorporating pilot lights;
– electromagnetic remote control switches (particular requirements are given in the relevant
part 2);
– switches incorporating a time-delay device (particular requirements are given in the
relevant part 2);
– combinations of switches and other functions (with the exception of switches combined with
fuses);
– electronic switches (particular requirements are given in the relevant part 2);
– switches having facilities for the outlet and retention of flexible cables (see annex B);
– isolating switches (particular requirements are given in the relevant Part 2).
NOTE 5 The minimum length of the flexible cable used with these switches may be governed by National Wiring
Rules.
Switches complying with this standard are suitable for use at ambient temperatures not
normally exceeding 25 °C, but occasionally reaching 35 °C.
NOTE 6 Switches complying with this standard are suitable only for incorporation in equipment in such a way and
in such a place that it is unlikely that the surrounding ambient temperature exceeds 35 °C.
In locations where special conditions prevail, such as in ships, vehicles and the like and in
hazardous locations, for example where explosions are liable to occur, special constructions
may be required.
IEC 60669-1:2007 history
2020IEC 60669-1:2017/COR1:2020 Corrigendum 1 - Switches for household and similar fixed-electrical installations - Part 1: General requirements
0000 IEC 60669-1:2017 RLV
2012IEC 60669-1:1998/ISH1:2012 Switches for household and similar fixed-electrical installations - Part 1: General requirements
2007IEC 60669-1:2007 Switches for household and similar fixed-electrical installations - Part 1: General requirements
2007IEC 60669-1:1998/AMD2:2006 Switches for household and similar fixed-electrical installations - Part 1: General requirements
2000IEC 60669-1:2000 Switches for household and similar fixed-electrical installations - Part 1: General requirements
1999IEC 60669-1:1998/AMD1:1999 Switches for household and similar fixed-electrical installations - Part 1: General requirements; Amendment 1
1998IEC 60669-1:1998 Switches for household and similar fixed-electrical installations - Part 1: General requirements
1970IEC 60669-1:1993/AMD2:1995 Amendment 2 - Switches for household and similar fixed-electrical installations - Part 1: General requirements
1970IEC 60669-1:1993/AMD1:1994 Amendment 1 - Switches for household and similar fixed-electrical installations - Part 1: General requirements
1993IEC 60669-1:1993 Switches for household and similar fixed-electrical installations; part 1: general requirements
1970IEC 60669-1:1981/AMD2:1992 Amendment 2 - Switches for household and similar fixed-electrical installations - Part 1: General requirements
1970IEC 60669-1:1981/AMD1:1987 Amendment 1 - Switches for household and similar fixed-electrical installations - Part 1: General requirements
1981IEC 60669-1:1981 Switches for household and similar fixed-electrical installations. Part 1 : General requirements