These requirements cover equipment and materials intended for installation and use in flammable anesthetizing locations where accumulation of static electricity presents a risk of fire or explosion due to the possibility of static sparks being generated in the presence of flammable anesthetic-air mixtures. These products provide an electrically conductive path from other electrically conductive objects and patients to ground. The products covered by this standard include bonding appliances, casters, anesthesia face masks and anesthesia reservoir bags, breathing tubes, footwear, hose and tubing, mattresses and pads, sheeting, and restraint straps. The products covered are for use in accordance with Article 517 of the National Electrical Code, NFPA 70, and Chapter 3 of the Standard for Health Care Facilities, NFPA 99. A product that contains features, characteristics, components, materials, or systems new or different from those covered by the requirements in this standard, and that involves a risk of fire, electric shock, or injury to persons shall be evaluated using the appropriate additional component and end-product requirements as determined necessary to maintain the acceptable level of safety as originally anticipated by the intent of this Standard. A product whose features, characteristics, components, materials, or systems conflict with specific provisions of this Standard cannot be judged to comply with this Standard. Where considered appropriate, revision of requirements shall be proposed and adopted in conformance with the methods employed for development, revision and implementation of this standard.
UL 1067-2006 history
1970UL 1067-2020 UL Standard for Safety Electrically Conductive Equipment and Materials for Use in Flammable Anesthetizing Locations
2015UL 1067 BULLETIN-2015 UL Standard for Safety Electrically Conductive Equipment and Materials for Use in Flammable Anesthetizing Locations (COMMENTS DUE: NOVEMBER 23@ 2015)
2011UL 1067 BULLETIN-2011 UL Standard for Safety Electrically Conductive Equipment and Materials for Use in Flammable Anesthetizing Locations (COMMENTS DUE: JULY 18@ 2011)
2011UL 1067-2011 UL Standard for Safety Electrically Conductive Equipment and Materials for Use in Flammable Anesthetizing Locations (Fifth Edition)
2006UL 1067-2006 UL Standard for Safety Electrically Conductive Equipment and Materials for Use in Flammable Anesthetizing Locations Fourth Edition
1997UL 1067-1997 UL Standard for Safety Electrically Conductive Equipment and Materials for Use in Flammable Anesthetizing Locations (Third Edition)
1987UL 1067-1987 Electrically conductive equipment and materials for use in flammable anesthetizing locations